Umm, why would you want to use telnet in the first place ?
ssh is safer and it is handy also in places where you don't need security.
Hi Gurus,
I just installed Knoppix 3.3 on my HDD. It works incredibly well, but I have a problem with the security level. I do use Knoppix to connect on other unix servers (Sun, HP, ...) and develop on those machines. The trouble is that a telnet works ok but I can't run any graphical interface because of DISPLAY not reachable. However, I have defined and exported the DISPLAY as found in 'ifconfig'. I have also enabled external display through 'xhost +'. Finally, I've found in /etc/hosts.allow and /etc/hosts.deny that the config was set up as 'PARANOID'. I've renamed both files (according to the man page, lack of file opens the connection). As long as I do not run a server but a workstation, security is not a major constraint for me. I'm missing a config file somewhere to enable DISPLAY to pass through but where. While testing, I realized that even assigning the IP address to the user knoppix (rather than the hos name) causes the same problem.
Could anyone help on this ?
TIA,
Pierre
Umm, why would you want to use telnet in the first place ?
ssh is safer and it is handy also in places where you don't need security.
Good question I didn't ask myself, but I assume it would make no difference in the current situation: graphical apps can't open the display and do abort. You could test it youself:Originally Posted by windos_no_thanks
1) 'ifconfig' to determine your IP address
2) export DISPLAY=IP address:0.0 (192.168.1.10:0.0 for example)
3) 'xclock' returns Error: Can't open display: ...
Any idea?
TIA,
Pierre
You are looking for the setting nolisten tcp in the file /etc/kde3/kdm/Xservers if you are doing this in KDE.Originally Posted by pierrevn
[edit]
You would have to restart kdm for the changes to take effect with /etc/init.d/kdm restart as root this best done from a console login unless you want to lose any unsaved work when KDE re-starts.
[/edit]
Thanks to you, Stephen: I removed this 'nolisten tcp' from the file and it works now as I expect. Great!
Cheers,
Pierre
I see you already got it working but using ssh should have made a difference. Using the -X switch (by default on in knoppix so you usually don't need to specify it) ssh forwards theOriginally Posted by pierrevn
X connections through the encrypted pipe. The application on the remote machine thinks
it is using a display on the same machine, your X-server also thinks the application is on the
same machine as itself and everyone is happy.
DELL PowerEdge R630 8SFF Server 2x E5-2680v4 2.4GHz =28 Cores 128GB H730 4xRJ45
$394.00
Dell PowerEdge R630 Server 2x E5-2680 V4 = 28 Cores S130 32GB RAM NEW 480GB SSD
$256.99
Dell PowerEdge R630 Server 2x E5-2640v3 2.60Ghz 16-Core 64GB H330
$182.65
Dell Poweredge R630 Server 2x E5-2620 V4 =16 Cores | S130 | 32GB RAM | 2x trays
$171.99
Dell PowerEdge R220 - Xeon E3-1220 v3 @3.10GHz | 8GB RAM | 500GB Storage
$50.00
DELL PowerEdge R730 Server 2x E5-2680v3 2.5GHz =24 Cores 32GB H730 4xRJ45
$247.00
Dell PowerEdge T430 Server w/ Intel Xeon E5-2650 V4 & 1100W PSU (2X) - NO RAM
$314.99
Dell PowerEdge R420 2 2.5 6C,16GB,8TB,RAID5,IDRAC7 ENT,2PSU
$150.00
Dell Poweredge R630 2x Xeon E5-2680 v4 2.4ghz 28-Cores / 128gb / H330 / 2x 1TB
$334.99
Dell Poweredge R730xd 2x E5-2660 v3 2.6ghz / 64gb / H730 / 24x Trays / 2x 750w
$344.99