Umm, why would you want to use telnet in the first place ?
ssh is safer and it is handy also in places where you don't need security.
Hi Gurus,
I just installed Knoppix 3.3 on my HDD. It works incredibly well, but I have a problem with the security level. I do use Knoppix to connect on other unix servers (Sun, HP, ...) and develop on those machines. The trouble is that a telnet works ok but I can't run any graphical interface because of DISPLAY not reachable. However, I have defined and exported the DISPLAY as found in 'ifconfig'. I have also enabled external display through 'xhost +'. Finally, I've found in /etc/hosts.allow and /etc/hosts.deny that the config was set up as 'PARANOID'. I've renamed both files (according to the man page, lack of file opens the connection). As long as I do not run a server but a workstation, security is not a major constraint for me. I'm missing a config file somewhere to enable DISPLAY to pass through but where. While testing, I realized that even assigning the IP address to the user knoppix (rather than the hos name) causes the same problem.
Could anyone help on this ?
TIA,
Pierre
Umm, why would you want to use telnet in the first place ?
ssh is safer and it is handy also in places where you don't need security.
Good question I didn't ask myself, but I assume it would make no difference in the current situation: graphical apps can't open the display and do abort. You could test it youself:Originally Posted by windos_no_thanks
1) 'ifconfig' to determine your IP address
2) export DISPLAY=IP address:0.0 (192.168.1.10:0.0 for example)
3) 'xclock' returns Error: Can't open display: ...
Any idea?
TIA,
Pierre
You are looking for the setting nolisten tcp in the file /etc/kde3/kdm/Xservers if you are doing this in KDE.Originally Posted by pierrevn
[edit]
You would have to restart kdm for the changes to take effect with /etc/init.d/kdm restart as root this best done from a console login unless you want to lose any unsaved work when KDE re-starts.
[/edit]
Thanks to you, Stephen: I removed this 'nolisten tcp' from the file and it works now as I expect. Great!
Cheers,
Pierre
I see you already got it working but using ssh should have made a difference. Using the -X switch (by default on in knoppix so you usually don't need to specify it) ssh forwards theOriginally Posted by pierrevn
X connections through the encrypted pipe. The application on the remote machine thinks
it is using a display on the same machine, your X-server also thinks the application is on the
same machine as itself and everyone is happy.
Western Digital WD140EDGZ 14 TB, Internal, 5400 RPM, 3.5 inch Hard Drive
$99.00
HITACHI HUS724040ALA640 4TB 7200RPM 64MB SATA 6.0Gb/s 3.5" HARD DRIVE ZERO HOURS
$52.00
Western Digital DC HC320 Ultrastar 8TB 7200RPM SATA HD, HUS728T8TALE6L4, 0B36404
$99.00
Seagate ST24000NM002H 24TB HDD Exos X24 HD 3.5 SATA 7200 Seagate Warranty
$399.99
HGST Ultrastar DC HC520 12TB SATA 6Gb 256MB 3.5" Enterprise HDD- HUH721212ALE601
$79.99
WD Ultrastar DC HC530 14TB SATA 6G 3.5" 7200RPM Enterprise HDD - WUH721414ALE604
$110.00
Seagate ST12000NM0127 12TB 256MB 7200RPM 3.5" SATA 6.0Gb/s Enterprise Hard Drive
$93.99
CISCO A03-D1TBSATA 1TB 7.2K 6G 2.5INCH SATA HDD
$9.00
Seagate ST1000VM002 1TB 64MB SATA6Gb/s 3.5" (Low Power) Hard Drive -PC, CCTV DVR
$24.99
Western Digital WD4000FYYZ RE 4TB 7200 RPM 64MB Cache SATA 6Gb/s 3.5" Hard Drive
$24.11