Umm, why would you want to use telnet in the first place ?
ssh is safer and it is handy also in places where you don't need security.
Hi Gurus,
I just installed Knoppix 3.3 on my HDD. It works incredibly well, but I have a problem with the security level. I do use Knoppix to connect on other unix servers (Sun, HP, ...) and develop on those machines. The trouble is that a telnet works ok but I can't run any graphical interface because of DISPLAY not reachable. However, I have defined and exported the DISPLAY as found in 'ifconfig'. I have also enabled external display through 'xhost +'. Finally, I've found in /etc/hosts.allow and /etc/hosts.deny that the config was set up as 'PARANOID'. I've renamed both files (according to the man page, lack of file opens the connection). As long as I do not run a server but a workstation, security is not a major constraint for me. I'm missing a config file somewhere to enable DISPLAY to pass through but where. While testing, I realized that even assigning the IP address to the user knoppix (rather than the hos name) causes the same problem.
Could anyone help on this ?
TIA,
Pierre
Umm, why would you want to use telnet in the first place ?
ssh is safer and it is handy also in places where you don't need security.
Good question I didn't ask myself, but I assume it would make no difference in the current situation: graphical apps can't open the display and do abort. You could test it youself:Originally Posted by windos_no_thanks
1) 'ifconfig' to determine your IP address
2) export DISPLAY=IP address:0.0 (192.168.1.10:0.0 for example)
3) 'xclock' returns Error: Can't open display: ...
Any idea?
TIA,
Pierre
You are looking for the setting nolisten tcp in the file /etc/kde3/kdm/Xservers if you are doing this in KDE.Originally Posted by pierrevn
[edit]
You would have to restart kdm for the changes to take effect with /etc/init.d/kdm restart as root this best done from a console login unless you want to lose any unsaved work when KDE re-starts.
[/edit]
Thanks to you, Stephen: I removed this 'nolisten tcp' from the file and it works now as I expect. Great!
Cheers,
Pierre
I see you already got it working but using ssh should have made a difference. Using the -X switch (by default on in knoppix so you usually don't need to specify it) ssh forwards theOriginally Posted by pierrevn
X connections through the encrypted pipe. The application on the remote machine thinks
it is using a display on the same machine, your X-server also thinks the application is on the
same machine as itself and everyone is happy.
HGST Ultrastar HE10 HUH721010ALE600 10TB SATA 6Gb/s 7200RPM 3.5" Enterprise HDD
$69.99
Western Digital WD60PURZ 6TB Hard Drive SATA6 Gb/s 64MB Cache 3.5 Inch
$109.99
WF12F DELL 1TB 7.2K 6GBPS SATA 2.5'' HDD HARD DRIVE ST91000640NS 0WF12F
$25.00
WD 2TB Certified Refurbished Elements, External Hard Drive - RWDBU6Y0020BBK-WESN
$49.99
HGST Ultrastar DC HC520 12TB SATA 6Gb 256MB 3.5" Enterprise HDD- HUH721212ALE601
$82.99
Seagate Exos 7E10 ST2000NM000B 2TB 7200RPM SATA 6.0Gb/s 3.5" Internal Hard Drive
$29.99
2 PACK Seagate ST1000LM035 Mobile HDD 1TB 2.5" SATA III Laptop Hard Drive
$26.85
Western Digital WD5000LPLX 500GB 2.5" SATA 32MB 6Gb/s 7200RPM Laptop Hard Drive
$7.99
WD 16TB Elements Desktop, Certified Refurbished Hard Drive - RWDBWLG0160HBK-NESN
$174.99
WD 4TB Certified Refurbished Elements, External Hard Drive - RWDBU6Y0040BBK-WESN
$69.99