Umm, why would you want to use telnet in the first place ?
ssh is safer and it is handy also in places where you don't need security.
Hi Gurus,
I just installed Knoppix 3.3 on my HDD. It works incredibly well, but I have a problem with the security level. I do use Knoppix to connect on other unix servers (Sun, HP, ...) and develop on those machines. The trouble is that a telnet works ok but I can't run any graphical interface because of DISPLAY not reachable. However, I have defined and exported the DISPLAY as found in 'ifconfig'. I have also enabled external display through 'xhost +'. Finally, I've found in /etc/hosts.allow and /etc/hosts.deny that the config was set up as 'PARANOID'. I've renamed both files (according to the man page, lack of file opens the connection). As long as I do not run a server but a workstation, security is not a major constraint for me. I'm missing a config file somewhere to enable DISPLAY to pass through but where. While testing, I realized that even assigning the IP address to the user knoppix (rather than the hos name) causes the same problem.
Could anyone help on this ?
TIA,
Pierre
Umm, why would you want to use telnet in the first place ?
ssh is safer and it is handy also in places where you don't need security.
Good question I didn't ask myself, but I assume it would make no difference in the current situation: graphical apps can't open the display and do abort. You could test it youself:Originally Posted by windos_no_thanks
1) 'ifconfig' to determine your IP address
2) export DISPLAY=IP address:0.0 (192.168.1.10:0.0 for example)
3) 'xclock' returns Error: Can't open display: ...
Any idea?
TIA,
Pierre
You are looking for the setting nolisten tcp in the file /etc/kde3/kdm/Xservers if you are doing this in KDE.Originally Posted by pierrevn
[edit]
You would have to restart kdm for the changes to take effect with /etc/init.d/kdm restart as root this best done from a console login unless you want to lose any unsaved work when KDE re-starts.
[/edit]
Thanks to you, Stephen: I removed this 'nolisten tcp' from the file and it works now as I expect. Great!
Cheers,
Pierre
I see you already got it working but using ssh should have made a difference. Using the -X switch (by default on in knoppix so you usually don't need to specify it) ssh forwards theOriginally Posted by pierrevn
X connections through the encrypted pipe. The application on the remote machine thinks
it is using a display on the same machine, your X-server also thinks the application is on the
same machine as itself and everyone is happy.
A-Tech 8GB DDR3 1600 PC3-12800 Laptop SODIMM 204-Pin Memory RAM PC3L DDR3L 1x 8G
$13.99
Samsung 16GB (2x8GB) DDR4 2400MHz PC4-19200 Desktop RAM Memory M378A1K43CB2-CRC
$19.95
Samsung 16GB 2Rx4 PC4-2133P DDR4-17000 1.2V RDIMM ECC Registered Server Memory
$16.29
32GB (2x16GB) DDR4 2666MHz Laptop Memory RAM 32G
$31.99
HyperX FURY DDR3 8GB 16GB 32GB 1600 MHz PC3-12800 Desktop RAM Memory DIMM 240pin
$12.90
A-Tech 8GB PC3-12800 Desktop DDR3 1600 MHz Non ECC 240-Pin DIMM Memory RAM 1x 8G
$13.99
Kingston HyperX FURY DDR3 8GB 16GB 32G 1600 1866 1333 Desktop Memory RAM DIMM
$13.25
TeamGroup 16GB PC4 2666 PC4 21300 DDR4 2666MHz 1.2V CL19 Desktop RAM Memory
$27.95
A-Tech 256GB 4x 64GB 4Rx4 PC4-19200 ECC Load Reduced LRDIMM Server Memory RAM
$287.96
A-Tech 128GB 8x 16GB 2Rx4 PC4-19200R DDR4 2400 ECC REG RDIMM Server Memory RAM
$175.92