I'm wondering the same thing. I'd like to leave the boot floppy in the floppy drive and have the config read off the CD-ROM. There should be a command...
Any possibility of burning the configurations to a CD rom and getting knoppix to read from the CD Rom rather than the floppy when the contents of the knoppix CD is copied to the hard disk?
I'm wondering the same thing. I'd like to leave the boot floppy in the floppy drive and have the config read off the CD-ROM. There should be a command...
you can save your configuration permanantly this way:
- save your configuration to the floppy (llike using floppyconfig)
- copy the contents of the floppy into the KNOPPIX directory on the cdrom (-> reburn it) or HD
-> The system will be configured automatically !
If you put the config files in the Knoppix directory on the HD, what do you type at the boot prompt at startup? Or, does it just find the config files when loading off the hard drive??
The config files are automatically found in the KNOPPIX dir, so you don`t have to type in anything. Depending on your installation, this KNOPPIX dir may be on the CD or HD. To work from HD, just copy the KNOPPIX directory onto a partition and boot from floppy.
Thanks for the reply, Robk. I'll put the config floppy's files in the Knoppix directory on the HD tonight.
Works perfectly! I just copied the floppyconfig files to the Knoppix directory on the hard drive and it works. I love Knoppix!
IBM CS821 20-Core 2.827GHz 128Gb 1.92Tb SSD 1U Linux Server - 8005-12N Power 8
$479.96
Red Hat Enterprise Linux 5 Server - New and Sealed
$19.99
Red Hat Enterprise Linux 5 Server RHF032US-R1 NEW Sealed
$59.95
Asus ESC4000 G3 Barebones 0GB HDD Linux
$200.00
2 x HP ProLiant BL460c (447707-B21) Blade Servers No RAM No HDD
$30.00
IBM E850 Power8 2x 12C 3.02GHz 512Gb 1.8Tb SAS 10GbE 16Gb Linux Server 8408-E8E
$799.96
1U BareMetal pfsense opnsense Router Firewall DNS Server 6x 10GB Ethernet Ports
$149.00
IBM Power 9 S922 8-Core 3.4-3.9Ghz 128Gb DDR4 2U Linux Server - 9009-22a
$3439.96
IBM System X 3250 M5 Single Xeon Quad Core E3-1220 v3 @3.1GHz,8GB RAM,Linux SUSE
$199.87
POGO Linux WEBWARE 1150 Rack-Mount Server Pentium 4 2.8GHz 512MB - No Drives
$179.99