Perhaps start with comparing the output of "ifconfig" and "netstat -r" under both OS's....
I've just done a HD install of 3.3 (11/19/03). It's on hdb2, a Maxtor 40 Gb 7200 rpm hard drive; on hda1 I have an install of Libranet 2.8.1 I use a US Robotics 56k Sportster external modem to connect, and it works perfectly in Libranet. However, when I set it up using pppconfig in my Knoppix install, it dials out, and by the appearence of the LED's it connects, but when I ping my ISP, I get a message (paraphrase) "5 packets sent, 0 packets recieved". I used pppconfig in Libranet and it set up with no problem; the configuration looks the same. Any ideas?
Perhaps start with comparing the output of "ifconfig" and "netstat -r" under both OS's....
A-Tech 8GB DDR3 1600 PC3-12800 Laptop SODIMM 204-Pin Memory RAM PC3L DDR3L 1x 8G
$13.99
Samsung 16GB 2Rx4 PC4-2133P DDR4-17000 1.2V RDIMM ECC Registered Server Memory
$16.29
HyperX FURY DDR3 8GB 16GB 32GB 1600 MHz PC3-12800 Desktop RAM Memory DIMM 240pin
$12.90
Samsung 8 GB PC4-17000 DDR4-2133 1Rx8 DDR4 Desktop Memory HP P/N 798034-001
$10.00
A-Tech 16GB 2 x 8GB PC3-12800 Laptop SODIMM DDR3 1600 Memory RAM PC3L 16G DDR3L
$27.98
A-Tech 8GB PC3-12800 Desktop DDR3 1600 MHz Non ECC 240-Pin DIMM Memory RAM 1x 8G
$13.99
Kingston HyperX FURY DDR3 8GB 16GB 32G 1600 1866 1333 Desktop Memory RAM DIMM
$13.25
32GB (4X8GB) DDR3 PC3-12800 1600 NON ECC LOW DENSITY MEMORY F3-12800CL10Q-32GBXL
$32.00
A-Tech 256GB 4x 64GB 4Rx4 PC4-19200 ECC Load Reduced LRDIMM Server Memory RAM
$287.96
A-Tech 64GB 4x 16GB 2Rx4 PC4-17000R DDR4 2133MHz ECC REG RDIMM Server Memory RAM
$87.96