Hi there,
i have the usb diamond supramax modem and when im booting it says that (usb detected, hotplug enabled..-by the way i didnt understand how hotplug works..) and the led of the modem is off and the modem isnt in the hardware detection list.
I installed the acm module without argument (dont know if it needs..) and after that still it wasnt detecting it. I read the FAQ and also the incompatible hardware list but i didnt see that my modem is in (or even the chipset)
cat lspcia
00:00.0 Host bridge: VIA Technologies, Inc. VT82C693A/694x [Apollo PRO133x] (rev 44)
Flags: bus master, medium devsel, latency 0
Memory at e8000000 (32-bit, prefetchable) [size=64M]
Capabilities: [a0] AGP version 1.0
00:01.0 PCI bridge: VIA Technologies, Inc. VT82C598/694x [Apollo MVP3/Pro133x AGP] (prog-if 00 [Normal decode])
Flags: bus master, 66Mhz, medium devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: e0000000-e7ffffff
Capabilities: [80] Power Management version 2
00:07.0 ISA bridge: VIA Technologies, Inc. VT82C596 ISA [Mobile South] (rev 12)
Subsystem: VIA Technologies, Inc. VT82C596/A/B PCI to ISA Bridge
Flags: bus master, stepping, medium devsel, latency 0
00:07.1 IDE interface: VIA Technologies, Inc. VT82C586/B/686A/B PIPC Bus Master IDE (rev 06) (prog-if 8a [Master SecP PriP])
Flags: bus master, medium devsel, latency 64
I/O ports at e000 [size=16]
00:07.2 USB Controller: VIA Technologies, Inc. USB (rev 0 (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. (Wrong ID) USB Controller
Flags: bus master, medium devsel, latency 64, IRQ 11
I/O ports at e400 [size=32]
00:07.3 Host bridge: VIA Technologies, Inc. VT82C596 Power Management (rev 20)
Flags: medium devsel
00:0a.0 Multimedia audio controller: Ensoniq ES1371 [AudioPCI-97] (rev 06)
Subsystem: Ensoniq Creative Sound Blaster AudioPCI64V, AudioPCI128
Flags: bus master, slow devsel, latency 64, IRQ 10
I/O ports at e800 [size=64]
Capabilities: [dc] Power Management version 1
01:00.0 VGA compatible controller: S3 Inc. 86c368 [Trio 3D/2X] (rev 02) (prog-if 00 [VGA])
Subsystem: S3 Inc. Trio3D/2X
Flags: bus master, medium devsel, latency 64
Memory at e0000000 (32-bit, non-prefetchable) [size=64M]
Expansion ROM at <unassigned> [disabled] [size=64K]
Capabilities: [dc] Power Management version 1
Capabilities: [80] AGP version 1.0
Any suggestions?
Thx for reading this
HP ProLiant DL380 Gen9 8SFF Server - E5-2698 v3 - 32Cores - 128GB Ram - 1TB HDD
$299.00
1U Supermicro Server 10 Bay 2x Intel Xeon 3.3Ghz 8C 128GB RAM 480GB SSD 2x 10GBE
$273.00
Dell Poweredge R730xd 3.5 2x E5-2690 v3 2.6ghz 64gb H730 14x Trays 2x 1100w
$489.99
Dell Poweredge R630 2x Xeon E5-2680 v4 2.4ghz 28-Cores / 128gb / H330 / 2x 1TB
$279.99
Dell PowerEdge R620 Server 2x E5-2660 v2 2.2GHz 20 Cores 256GB RAM 1x 480GB SSD
$139.99
Dell PowerEdge R620 Server - 256GB RAM, 2x8cCPU, 120Gb SSD/3x900Gb SAS, Proxmox
$320.00
R630 DELL 8 x 2.5'' POWEREDGE 2X E5-2680V4 32GB RAM IDRAC ENT & NDC 2X 495W PSU
$169.95
SuperMicro Server 505-2 Intel Atom 2.4GHz 8GB RAM SYS-5018A-FTN4 1U Rackmount
$202.49
HP ProLiant DL380 Gen9 16SFF 2x E5-2620v4 2.1GHz =16 Cores 32GB P840 4xRJ45
$267.00
Dell Desktop Quad Core i5 8400 500GB SSD + 2TB HDD 32GB RAM Window Server 2022
$320.99