Results 1 to 4 of 4

Thread: rickenbacherus...thank you for all of your help

  1. #1
    Junior Member registered user
    Join Date
    Dec 2003
    Posts
    25

    rickenbacherus...thank you for all of your help

    rick i sincerely appreciate your patience and helpfulness, i have pushed my luck with this forum, and especially you, you have been a saint. i know it must get annoying if u feel you are answering questions for someone too lazy to get the info themselves. i assure you my friend, that is not the case with me. i am used to having to spend twice the time searching and reading, so when i came here it sort of spoiled me, but i also know the value of learning on my own, and using guys like you on an as needed basis, in the long run it is a much more comprehendable knowledge to learn in that manner, (as i am certain you are aware) so i am off to hunt and read, i really would like to thank u again for all of your help and anxiously anticipate my return to this forum in the near future, with the ability to actually carry on a conversation about knoppix

  2. #2
    Junior Member registered user
    Join Date
    Nov 2003
    Location
    Düsseldorf, Germany
    Posts
    20
    I'll absolutely second that - this forum is incredible, like the Knoppix community in general (for all even barely conversant in German, the German forum will also offer the best help imaginable). Thank you to all you experienced users for your patience and generosity with your time!!! Apart from Mr Knopper's great work, it's you people who make Knoppix really accessible to us newbies.

  3. #3
    Member registered user
    Join Date
    Mar 2003
    Location
    Berlin, Germany
    Posts
    94
    Hi

    (for all even barely conversant in German, the German forum will also offer the best help imaginable)
    If you have a _very_special_ question that could not be answered here don't hesitate to ask the german forum, also in english.

    Ciao Martin

  4. #4
    Senior Member registered user
    Join Date
    Mar 2003
    Location
    colorado springs, colorado
    Posts
    1,933

    Re: rickenbacherus...thank you for all of your help

    Quote Originally Posted by nachral
    rick i sincerely appreciate your patience and helpfulness, i have pushed my luck with this forum, and especially you, you have been a saint. i know it must get annoying if u feel you are answering questions for someone too lazy to get the info themselves. i assure you my friend, that is not the case with me. i am used to having to spend twice the time searching and reading, so when i came here it sort of spoiled me, but i also know the value of learning on my own, and using guys like you on an as needed basis, in the long run it is a much more comprehendable knowledge to learn in that manner, (as i am certain you are aware) so i am off to hunt and read, i really would like to thank u again for all of your help and anxiously anticipate my return to this forum in the near future, with the ability to actually carry on a conversation about knoppix
    Glad to help. I have posted more than my own share of questions in other forums. I don't worry too much about people not searching- if it's obvious they didn't even try I usually just ignore the question.

Similar Threads

  1. A personal THANK YOU - rickenbacherus
    By Cuddles in forum General Support
    Replies: 9
    Last Post: 12-30-2003, 03:07 AM
  2. Hey Rickenbacherus :p
    By Doc in forum The Lounge
    Replies: 2
    Last Post: 06-26-2003, 01:11 AM
  3. rickenbacherus, you seem very knowledgable, please help
    By tsaelee in forum Hardware & Booting
    Replies: 19
    Last Post: 03-28-2003, 11:26 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


HPE BL460c G10 ProLiant Blade | 2x Silver 4110 | 16GB | P204I | 2x300GB 10KRPM picture

HPE BL460c G10 ProLiant Blade | 2x Silver 4110 | 16GB | P204I | 2x300GB 10KRPM

$1419.00



HPE BL460c G10 ProLiant Blade | 2x Silver 4110 | 32GB | P204I | 2x900GB 10KRPM picture

HPE BL460c G10 ProLiant Blade | 2x Silver 4110 | 32GB | P204I | 2x900GB 10KRPM

$1499.00



HP ProLiant BL460c G9 (Gen9) 2x E5-2670V3 12 Core 3.1GHz No Ram or No Drives picture

HP ProLiant BL460c G9 (Gen9) 2x E5-2670V3 12 Core 3.1GHz No Ram or No Drives

$59.98



Dell PowerEdge M620 0F9HJC Blade Server 2*E5-2670 2.60GHz 192GB RAM 2*300GB SAS picture

Dell PowerEdge M620 0F9HJC Blade Server 2*E5-2670 2.60GHz 192GB RAM 2*300GB SAS

$103.99



Dell PowerEdge M630 Blade Server 1x Xeon E5-2630 v4 CPU / Motherboard P/N 0R10KG picture

Dell PowerEdge M630 Blade Server 1x Xeon E5-2630 v4 CPU / Motherboard P/N 0R10KG

$69.99



DELL M630 BLADE SERVER x2 XEON E5-2660V3 @ 2.6GH H730 PERC HDD CADDIES 16GB FC picture

DELL M630 BLADE SERVER x2 XEON E5-2660V3 @ 2.6GH H730 PERC HDD CADDIES 16GB FC

$50.00



HP ProLiant BL460c Server Blade (2 x  CPU) 24GB RAM/No Drives  picture

HP ProLiant BL460c Server Blade (2 x CPU) 24GB RAM/No Drives

$45.60



Dell PowerEdge VRTX 2x PowerEdge M630 Blade Server 512GB Ram Total w/ Rails picture

Dell PowerEdge VRTX 2x PowerEdge M630 Blade Server 512GB Ram Total w/ Rails

$1750.00



Cisco UCS 5108 Blade Server Chassis Enclosure N20-C6508 4x PSU 8x Fans 2x Fabric picture

Cisco UCS 5108 Blade Server Chassis Enclosure N20-C6508 4x PSU 8x Fans 2x Fabric

$139.99



Dell PowerEdge M620 Blade Server picture

Dell PowerEdge M620 Blade Server

$39.99