Results 1 to 4 of 4

Thread: rickenbacherus...thank you for all of your help

  1. #1
    Junior Member registered user
    Join Date
    Dec 2003
    Posts
    25

    rickenbacherus...thank you for all of your help

    rick i sincerely appreciate your patience and helpfulness, i have pushed my luck with this forum, and especially you, you have been a saint. i know it must get annoying if u feel you are answering questions for someone too lazy to get the info themselves. i assure you my friend, that is not the case with me. i am used to having to spend twice the time searching and reading, so when i came here it sort of spoiled me, but i also know the value of learning on my own, and using guys like you on an as needed basis, in the long run it is a much more comprehendable knowledge to learn in that manner, (as i am certain you are aware) so i am off to hunt and read, i really would like to thank u again for all of your help and anxiously anticipate my return to this forum in the near future, with the ability to actually carry on a conversation about knoppix

  2. #2
    Junior Member registered user
    Join Date
    Nov 2003
    Location
    Düsseldorf, Germany
    Posts
    20
    I'll absolutely second that - this forum is incredible, like the Knoppix community in general (for all even barely conversant in German, the German forum will also offer the best help imaginable). Thank you to all you experienced users for your patience and generosity with your time!!! Apart from Mr Knopper's great work, it's you people who make Knoppix really accessible to us newbies.

  3. #3
    Member registered user
    Join Date
    Mar 2003
    Location
    Berlin, Germany
    Posts
    94
    Hi

    (for all even barely conversant in German, the German forum will also offer the best help imaginable)
    If you have a _very_special_ question that could not be answered here don't hesitate to ask the german forum, also in english.

    Ciao Martin

  4. #4
    Senior Member registered user
    Join Date
    Mar 2003
    Location
    colorado springs, colorado
    Posts
    1,933

    Re: rickenbacherus...thank you for all of your help

    Quote Originally Posted by nachral
    rick i sincerely appreciate your patience and helpfulness, i have pushed my luck with this forum, and especially you, you have been a saint. i know it must get annoying if u feel you are answering questions for someone too lazy to get the info themselves. i assure you my friend, that is not the case with me. i am used to having to spend twice the time searching and reading, so when i came here it sort of spoiled me, but i also know the value of learning on my own, and using guys like you on an as needed basis, in the long run it is a much more comprehendable knowledge to learn in that manner, (as i am certain you are aware) so i am off to hunt and read, i really would like to thank u again for all of your help and anxiously anticipate my return to this forum in the near future, with the ability to actually carry on a conversation about knoppix
    Glad to help. I have posted more than my own share of questions in other forums. I don't worry too much about people not searching- if it's obvious they didn't even try I usually just ignore the question.

Similar Threads

  1. A personal THANK YOU - rickenbacherus
    By Cuddles in forum General Support
    Replies: 9
    Last Post: 12-30-2003, 03:07 AM
  2. Hey Rickenbacherus :p
    By Doc in forum The Lounge
    Replies: 2
    Last Post: 06-26-2003, 01:11 AM
  3. rickenbacherus, you seem very knowledgable, please help
    By tsaelee in forum Hardware & Booting
    Replies: 19
    Last Post: 03-28-2003, 11:26 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


H261-Z61 2U 24SFF AMD Server 8x EPYC 7551 256-Cores 256GB RAM 8x25G NIC 2x2200W picture

H261-Z61 2U 24SFF AMD Server 8x EPYC 7551 256-Cores 256GB RAM 8x25G NIC 2x2200W

$2512.18



Dell PowerEdge R640 Server 2x Gold 6150 2.70Ghz 36-Core 256GB 2x 960GB SSD H730P picture

Dell PowerEdge R640 Server 2x Gold 6150 2.70Ghz 36-Core 256GB 2x 960GB SSD H730P

$1737.25



H261-Z61 2U 24SFF AMD Server 8x EPYC 7551 256-Cores 512GB RAM 8x25G NIC 2x2200W picture

H261-Z61 2U 24SFF AMD Server 8x EPYC 7551 256-Cores 512GB RAM 8x25G NIC 2x2200W

$2888.18



Dell PowerEdge FX2 FX2S Enclosure - 4x PowerEdge FC640 w/ 8x Gold 6132 112C 1TB picture

Dell PowerEdge FX2 FX2S Enclosure - 4x PowerEdge FC640 w/ 8x Gold 6132 112C 1TB

$2294.99



Dell PowerEdge R720XD Xeon E5-2680 V2 2.8GHz 20 Cores 256GB RAM 12x4TB picture

Dell PowerEdge R720XD Xeon E5-2680 V2 2.8GHz 20 Cores 256GB RAM 12x4TB

$510.00



DELL PowerEdge R730 Server 2x E5-2690v3 2.6GHz =24 Cores 32GB H730 4xRJ45 picture

DELL PowerEdge R730 Server 2x E5-2690v3 2.6GHz =24 Cores 32GB H730 4xRJ45

$275.00



Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 128GB RAM No HDD picture

Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 128GB RAM No HDD

$389.99



Dell PowerEdge R620 Server 2x Xeon  E5-2620 @ 2.0GHz 64GB RAM NO HDDs picture

Dell PowerEdge R620 Server 2x Xeon E5-2620 @ 2.0GHz 64GB RAM NO HDDs

$108.96



Dell PowerEdge R430 3.5 1U 2x E5-2690 v3 2.6ghz 24-Cores 256gb 4x Trays 2x 550w picture

Dell PowerEdge R430 3.5 1U 2x E5-2690 v3 2.6ghz 24-Cores 256gb 4x Trays 2x 550w

$289.99



HP ProLiant DL380 Gen9 16SFF 2x E5-2680v4 2.4GHz =28 Cores 64GB P840 4xRJ45 picture

HP ProLiant DL380 Gen9 16SFF 2x E5-2680v4 2.4GHz =28 Cores 64GB P840 4xRJ45

$355.00