Hi lafar,
I don't know your configuration, but did you try the standard cheatcodes "knoppix nosmp noapic"? There are many new boards that need this help.
Ciao Martin
Hello!
I have Knoppix 3.1 (it's FreeEduc based on Knoppix 3.1). It works fine!
I have Knoppix 3.2 (it's EduCD based on Knoppix 3.2). I have a "pure" Knoppix 3.3. They have (I have) some problems.
First - when running Knoppix from CD it hangs after "searching and configuring /etc/fstab". Starting Knoppix with "knoppix dma" helps and everything works ok.
Second. I cannot mount my windows partitions.
Am I doing anything bad or is something bad with newer Knoppix?
Below - what fdisk says:
----------------------------------------------
# fdisk /dev/hda
The number of cylinders for this disk is set to 2432.
There is nothing wrong with that, but this is larger than 1024,
and could in certain setups cause problems with:
1) software that runs at boot time (e.g., old versions of LILO)
2) booting and partitioning software from other OSs
(e.g., DOS FDISK, OS/2 FDISK)
Command (m for help): p
Disk /dev/hda: 20.0 GB, 20003880960 bytes
255 heads, 63 sectors/track, 2432 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/hda1 * 1 2431 19526976 c W95 FAT32 (LBA)
----------------------------------------------------------
... and what mount says:
# mount /dev/hda1 /mnt/hda
mount: error while guessing filesystem type
mount: you must specify the filesystem type
# mount -t vfat /dev/hda1 /mnt/hda
mount: wrong fs type, bad option, bad superblock on /dev/hda1,
or too many mounted file systems
(could this be the IDE device where you in fact use
ide-scsi so that sr0 or sda or so is needed?)
-------------------------------------------------------------
... and my /etc/fstab
----------------------------------------------
root@0[etc]# more fstab
proc /proc proc defaults 0 0
pts /dev/pts devpts mode=0622 0 0
/dev/fd0 /mnt/auto/floppy auto user,noauto,exec,umask=000 0 0
/dev/cdrom /mnt/auto/cdrom auto user,noauto,exec,ro 0 0
# Added by KNOPPIX
/dev/hda /mnt/hda auto noauto,users,exec 0 0
# mount -t vfat /dev/hda /mnt/hda
mount: wrong fs type, bad option, bad superblock on /dev/hda,
or too many mounted file systems
# mount /dev/hda
mount: you must specify the filesystem type
Hi lafar,
I don't know your configuration, but did you try the standard cheatcodes "knoppix nosmp noapic"? There are many new boards that need this help.
Ciao Martin
Solved!
"hdparm -z" has halped!
Samsung SSD 860 EVO 1TB 2.5 Inch SATA III Internal Solid State Drive
$49.99
Samsung Galaxy Tab S9 FE SM-X510 128GB, Wi-Fi, 10.9" - Gray
$279.99
Samsung - S Pen Creator Edition - White
$38.00
Samsung Galaxy Tab A9+ 11.0" 64GB Gray Wi-Fi Tablet Bundle SM-X210NZAYXAR 2023
$149.99
SAMSUNG 8GB 1RX8 DDR4 PC4-2666V SO-DIMM LAPTOP RAM M471A1K43DB1-CTD E2-6(9)
$12.99
Samsung 27" Ultra-Slim LED Curved Monitor HDMI (LC27F390FHN) ™
$97.99
Samsung Chromebook 3 4GB 16GB SSD 11.6-Inch Laptop XE500C13-K02US HDMI WIFI
$39.59
Samsung Galaxy Tab A 8" SM-T387V 32GB Verizon WIFI + Cellular Grade A Condition
$52.49
Samsung 990 PRO 4TB M.2 NVMe Internal SSD - Model MZ-V9P4T0
$275.99
Samsung Galaxy Tab S6 Lite SM-P613 64GB 10.4" Oxford Gray Tablet Bundle Open Box
$164.95