Comment or remove 'prompt'- rerun lilo- done.
How do I edit lilo.conf so that it doesn't show on bootup? I tried setting the delay to 0 (edit:found out lilo.conf doesn't like non integer values) but lilo still pops up on bootup with the same delay it had before (approx 15 sec). Do I have to edit more than the delay?
After I edited and saved lilo.conf I ran lilo by typing "lilo" into a root shell. It didn't give me any errors and everything is still functioning properly (XP and Linux). Are there any arguments I have to give lilo at the shell to make it recognize my new changes?
Comment or remove 'prompt'- rerun lilo- done.
Thanks, got lilo.conf setup the way I want it, now the other people using the comp don't have to see lilo or Linux when they boot up.
Is there any way to set it up so I can select Knoppix from the boot manager I am using (GAG Graphical Boot Manager on floppy) and it will boot Knoppix automatically (either with or w/o lilo) and have it boot WinXP without any lilo at all if the GAG floppy is not in the drive at boot?
If there isn't any good solution to that, its no problem, using the Knoppix boot floppy to boot is fine with me for now.
Thanks again for the help .
Edit(2): My boot disk keeps getting stuck in the drive (can usually get it out tho), this is the only disk that this happens to (talk about luck huh?) so I'm going to try to find out how to make a boot floppy in hd Knoppix.
BTW, delay=0 isn't what you want, it's timeout=0.
Regards,
dunno- never tried GAG. You can have lilo offer you a menu and set it to default to either OS.Originally Posted by *ix Newbie
You can simply issue mkboot and that should get you a floppy. Alternatively if you wanted a copy of your current floppy you could do:Edit(2): My boot disk keeps getting stuck in the drive (can usually get it out tho), this is the only disk that this happens to (talk about luck huh?) so I'm going to try to find out how to make a boot floppy in hd Knoppix.
dd if=/dev/fd0 of=/tmp/floppy.img
That gets you a copy, now to put it on the new floppy:
dd if=/tmp/floppy.img of=/dev/fd0
voila!
Thanks, thats a lot simpler than other guides on making a boot floppy. I'm assuming for now I don't have to give any arguments to mkboot in order to make the floppy. Edit: mkboot installs lilo on the floppy, when I boot with lilo on the floppy I get an error. Is there any way to make mkboot pretend lilo (or grub) isn't there?
According to lilo.conf, lilo is installed in my linux partition and not the hard drive itself, so it shouldn't be in the MBR, correct?
Lilo is "helping" boot my machine. When I boot it shows the default boot (black screen with dell logo and progress bar) then Lilo tells me its booting WinNT (thats what I set as default). So I'm not completely clear on what's going on at this point, although everything seems to be working fine.
A-Tech 8GB DDR3 1600 PC3-12800 Laptop SODIMM 204-Pin Memory RAM PC3L DDR3L 1x 8G
$13.99
HyperX FURY RAM DDR4 16GB 8GB 32GB 4GB 3200 2666 2400 2133 Desktop Memory DIMM
$9.64
A-Tech 16GB 2 x 8GB PC3-12800 Laptop SODIMM DDR3 1600 Memory RAM PC3L 16G DDR3L
$27.98
CRUCIAL DDR3L 8GB 16GB 32GB 1600 MHz PC3-12800 Laptop Memory RAM SODIMM 204-Pin
$14.35
A-Tech 8GB PC3-12800 Desktop DDR3 1600 MHz Non ECC 240-Pin DIMM Memory RAM 1x 8G
$13.99
HMT84GL7AMR4C-RD 32GB DDR3 Server Memory RAM 14900L ECC REG 4Rx4 SK Hynix Cisco
$13.99
A-Tech 16GB 2x 8GB PC3-12800 Desktop DDR3 1600 MHz 240pin DIMM Memory RAM 16G 8G
$27.98
Crucial DDR3 16GB 1600 2x 8GB PC3-12800 Laptop SODIMM Memory RAM PC3L 16G DDR3L
$21.95
Hynix 64GB 4Rx4 PC4-2133P-L LRDIMM DDR4-17000 ECC Load Reduced Server Memory RAM
$64.99
A-Tech 64GB 4x 16GB 2Rx4 PC4-19200R DDR4 2400MHz ECC REG RDIMM Server Memory RAM
$87.96