Results 1 to 6 of 6

Thread: Lilo.conf questions

  1. #1
    Junior Member
    Join Date
    Dec 2003
    Posts
    3

    Lilo.conf questions

    How do I edit lilo.conf so that it doesn't show on bootup? I tried setting the delay to 0 (edit:found out lilo.conf doesn't like non integer values) but lilo still pops up on bootup with the same delay it had before (approx 15 sec). Do I have to edit more than the delay?

    After I edited and saved lilo.conf I ran lilo by typing "lilo" into a root shell. It didn't give me any errors and everything is still functioning properly (XP and Linux). Are there any arguments I have to give lilo at the shell to make it recognize my new changes?

  2. #2
    Senior Member registered user
    Join Date
    Mar 2003
    Location
    colorado springs, colorado
    Posts
    1,933
    Comment or remove 'prompt'- rerun lilo- done.

  3. #3
    Junior Member
    Join Date
    Dec 2003
    Posts
    3
    Thanks, got lilo.conf setup the way I want it, now the other people using the comp don't have to see lilo or Linux when they boot up.

    Is there any way to set it up so I can select Knoppix from the boot manager I am using (GAG Graphical Boot Manager on floppy) and it will boot Knoppix automatically (either with or w/o lilo) and have it boot WinXP without any lilo at all if the GAG floppy is not in the drive at boot?

    If there isn't any good solution to that, its no problem, using the Knoppix boot floppy to boot is fine with me for now.

    Thanks again for the help .

    Edit(2): My boot disk keeps getting stuck in the drive (can usually get it out tho), this is the only disk that this happens to (talk about luck huh?) so I'm going to try to find out how to make a boot floppy in hd Knoppix.

  4. #4
    Senior Member registered user
    Join Date
    Nov 2002
    Location
    Long Island, NY, USA
    Posts
    1,256
    BTW, delay=0 isn't what you want, it's timeout=0.

    Regards,

  5. #5
    Senior Member registered user
    Join Date
    Mar 2003
    Location
    colorado springs, colorado
    Posts
    1,933
    Quote Originally Posted by *ix Newbie
    Thanks, got lilo.conf setup the way I want it, now the other people using the comp don't have to see lilo or Linux when they boot up.

    Is there any way to set it up so I can select Knoppix from the boot manager I am using (GAG Graphical Boot Manager on floppy) and it will boot Knoppix automatically (either with or w/o lilo) and have it boot WinXP without any lilo at all if the GAG floppy is not in the drive at boot?
    dunno- never tried GAG. You can have lilo offer you a menu and set it to default to either OS.

    Edit(2): My boot disk keeps getting stuck in the drive (can usually get it out tho), this is the only disk that this happens to (talk about luck huh?) so I'm going to try to find out how to make a boot floppy in hd Knoppix.
    You can simply issue mkboot and that should get you a floppy. Alternatively if you wanted a copy of your current floppy you could do:

    dd if=/dev/fd0 of=/tmp/floppy.img

    That gets you a copy, now to put it on the new floppy:

    dd if=/tmp/floppy.img of=/dev/fd0

    voila!

  6. #6
    Junior Member
    Join Date
    Dec 2003
    Posts
    3
    Thanks, thats a lot simpler than other guides on making a boot floppy. I'm assuming for now I don't have to give any arguments to mkboot in order to make the floppy. Edit: mkboot installs lilo on the floppy, when I boot with lilo on the floppy I get an error. Is there any way to make mkboot pretend lilo (or grub) isn't there?

    According to lilo.conf, lilo is installed in my linux partition and not the hard drive itself, so it shouldn't be in the MBR, correct?

    Lilo is "helping" boot my machine. When I boot it shows the default boot (black screen with dell logo and progress bar) then Lilo tells me its booting WinNT (thats what I set as default). So I'm not completely clear on what's going on at this point, although everything seems to be working fine.

Similar Threads

  1. Reinstall lilo to hda, using hda lilo.conf and knoppix live
    By tomjermy in forum Hardware & Booting
    Replies: 1
    Last Post: 03-17-2005, 01:07 AM
  2. can't edit lilo.conf
    By totenengle in forum General Support
    Replies: 2
    Last Post: 07-09-2004, 03:39 AM
  3. lilo.conf
    By A. Jorge Garcia in forum Hdd Install / Debian / Apt
    Replies: 11
    Last Post: 12-05-2003, 05:03 PM
  4. Different LILO.conf during remastering
    By greenbridge in forum Customising & Remastering
    Replies: 0
    Last Post: 08-11-2003, 08:51 PM
  5. lilo.conf qeustion
    By mordor in forum General Support
    Replies: 0
    Last Post: 03-28-2003, 07:42 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


Seagate Exos 7E10 ST2000NM000B 2TB 7200RPM SATA 6.0Gb/s 3.5

Seagate Exos 7E10 ST2000NM000B 2TB 7200RPM SATA 6.0Gb/s 3.5" Internal Hard Drive

$29.99



Seagate 10TB 7200RPM 12Gbps 3.5in SAS Hard Drive ST10000NM096 picture

Seagate 10TB 7200RPM 12Gbps 3.5in SAS Hard Drive ST10000NM096

$79.99



HGST Ultrastar HE10 HUH721010ALE600 10TB SATA 6Gb/s 7200RPM 3.5

HGST Ultrastar HE10 HUH721010ALE600 10TB SATA 6Gb/s 7200RPM 3.5" Enterprise HDD

$69.99



Dell ST2000NX0403 2T SATA 2.5 inch 7.2K CK3MN server hard drive picture

Dell ST2000NX0403 2T SATA 2.5 inch 7.2K CK3MN server hard drive

$45.00



HGST Ultrastar DC HC520 12TB SATA 6Gb 256MB 3.5

HGST Ultrastar DC HC520 12TB SATA 6Gb 256MB 3.5" Enterprise HDD- HUH721212ALE601

$79.99



Seagate ST12000NM0127 12TB 256MB 7200RPM 3.5

Seagate ST12000NM0127 12TB 256MB 7200RPM 3.5" SATA 6.0Gb/s Enterprise Hard Drive

$93.88



Seagate ST12000NM0127 12TB SATA 6Gb/s 256MB 7200RPM 3.5

Seagate ST12000NM0127 12TB SATA 6Gb/s 256MB 7200RPM 3.5" Enterprise Hard Drive

$99.99



SEAGATE ST4000NM0023 HARD DRIVE 3.5

SEAGATE ST4000NM0023 HARD DRIVE 3.5" SAS 4TB HDD

$16.99



Western Digital WD10JUCT 1TB 2.5

Western Digital WD10JUCT 1TB 2.5" SATA 3Gb/s 5400 RPM 16MB Laptop Hard Drive

$17.98



8TB Seagate Archive SATA 3.5

8TB Seagate Archive SATA 3.5" HDD Hard Drive 100% Healthy 200MB/s ST8000AS0002

$36.94