-
Junior Member
registered user
Configuring VT8233 chipset audio
I jus downloaded Knoppix v3.6 today and it detected every piece of hardware on my comp (Cheers to those guys working at Knoppix)...but my soundcard seems to be a problem...The driver it has chosen via82cxxx_audio doesnt seem to work...I read on the Knoppix site that there is a problem when it comes to vt8233 and configuring it for linux...but the thing is my sound card worked under Mandrake 10.0 Community edition under the Open Sound System and the driver there was snd_via82xxx .. So can someone direct me as to how i can configure my sound card? and can i change the driver to snd_via82xxx? if so where can i find the config tool?
-
Junior Member
registered user
Output of lspci -v
Here's the full output of lspci -v
root@ttyp0[knoppix]# lspci -v
0000:00:00.0 Host bridge: VIA Technologies, Inc. VT8378 [KM400] Chipset Host Bridge
Subsystem: Asustek Computer, Inc.: Unknown device 811b
Flags: bus master, 66MHz, medium devsel, latency 8
Memory at d0000000 (32-bit, prefetchable) [size=128M]
Capabilities: [80] AGP version 3.5
Capabilities: [c0] Power Management version 2
0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI Bridge (prog-if 00 [Normal decode])
Flags: bus master, 66MHz, medium devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Memory behind bridge: dc000000-ddffffff
Prefetchable memory behind bridge: d8000000-dbffffff
Capabilities: [80] Power Management version 2
0000:00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80) (prog-if 00 [UHCI])
Subsystem: Asustek Computer, Inc. A7V600 motherboard
Flags: bus master, medium devsel, latency 32, IRQ 21
I/O ports at d000 [size=32]
Capabilities: [80] Power Management version 2
0000:00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80) (prog-if 00 [UHCI])
Subsystem: Asustek Computer, Inc. A7V600 motherboard
Flags: bus master, medium devsel, latency 32, IRQ 21
I/O ports at d400 [size=32]
Capabilities: [80] Power Management version 2
0000:00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 80) (prog-if 00 [UHCI])
Subsystem: Asustek Computer, Inc. A7V600 motherboard
Flags: bus master, medium devsel, latency 32, IRQ 21
I/O ports at d800 [size=32]
Capabilities: [80] Power Management version 2
0000:00:10.3 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 82) (prog-if 20 [EHCI])
Subsystem: Asustek Computer, Inc. A7V600 motherboard
Flags: bus master, medium devsel, latency 32, IRQ 21
Memory at de000000 (32-bit, non-prefetchable) [size=256]
Capabilities: [80] Power Management version 2
0000:00:11.0 ISA bridge: VIA Technologies, Inc. VT8235 ISA Bridge
Subsystem: Asustek Computer, Inc.: Unknown device 80f9
Flags: bus master, stepping, medium devsel, latency 0
Capabilities: [c0] Power Management version 2
0000:00:11.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06) (prog-if 8a [Master SecP PriP])
Subsystem: Asustek Computer, Inc. A7V600 motherboard
Flags: bus master, medium devsel, latency 32, IRQ 20
I/O ports at dc00 [size=16]
Capabilities: [c0] Power Management version 2
0000:00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 50)
Subsystem: Asustek Computer, Inc. A7V600 motherboard (ADI AD1980 codec [SoundMAX])
Flags: medium devsel, IRQ 22
I/O ports at e000 [size=256]
Capabilities: [c0] Power Management version 2
0000:00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 74)
Subsystem: Asustek Computer, Inc.: Unknown device 80ff
Flags: bus master, medium devsel, latency 32, IRQ 23
I/O ports at e800 [size=256]
Memory at de001000 (32-bit, non-prefetchable) [size=256]
Capabilities: [40] Power Management version 2
0000:01:00.0 VGA compatible controller: VIA Technologies, Inc. VT8378 [S3 UniChrome] Integrated Video (rev 01) (prog-if 00 [VGA])
Subsystem: Asustek Computer, Inc.: Unknown device 80ed
Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 16
Memory at d8000000 (32-bit, prefetchable) [size=64M]
Memory at dc000000 (32-bit, non-prefetchable) [size=16M]
Expansion ROM at <unassigned> [disabled] [size=64K]
Capabilities: [60] Power Management version 2
Capabilities: [70] AGP version 2.0
-
but the thing is my sound card worked under Mandrake 10.0 Community edition under the Open Sound System and the driver there was snd_via82xxx ..
i am surprized... for me snd_via82xx is the ALSA module,and via82xx the OSS one.
pls try knoppix with cheatcode ALSA=via82xx
use kmix, help, hardware info (or something like that, I have a french version) to check if you use OSS or ALSA.
-
Junior Member
registered user
i checked in mandrake .. it uses snd_via82xx under OSS and sound works fine...can i possibly change this option during booting instead of it autoconfiguring to via_82cxxx?
-
Senior Member
registered user
Go to Control center---->Sound & multimedia-->Sound system---->Hardware
---->change autodetect to Open Sound System---apply.
-
Junior Member
registered user
Originally Posted by
shah
Go to Control center---->Sound & multimedia-->Sound system---->Hardware
---->change autodetect to Open Sound System---apply.
I maybe a new user...but i did all what you said...it only worked in Mandrake...doesnt work in Knoppix
-
Senior Member
registered user
-
Junior Member
registered user
Originally Posted by
shah
Run this command in root konsole: /etc/init.d/alsa-autoconfig
See if your card is detected and configured.
Configure as my last post, change autodetect to Advace linux sound architecture (alsa)
Test if sound is produced.
If succeed, then run this command to make alsa configure everytime you boot: update-rc.d alsa-autoconfig defaults
Good luck
Tried it....doesnt work...however is there a similar command for oss (like oss-autoconfig or something)...also where are the config files for sound present, under what filename.
-
Senior Member
registered user
Have you try booting knoppix cd with cheatcodes: knoppix alsa
-
Junior Member
registered user
Yes, I tried with knoppix alsa and even knoppix alsa=es1938
Both doesnt work
Similar Threads
-
By vampirefo in forum Hardware & Booting
Replies: 2
Last Post: 03-27-2005, 04:40 PM
-
By psychopath in forum Hardware & Booting
Replies: 0
Last Post: 03-10-2005, 09:27 PM
-
By jdiercks in forum Hardware & Booting
Replies: 1
Last Post: 08-18-2004, 03:17 AM
-
By Pater in forum Hardware & Booting
Replies: 0
Last Post: 02-21-2004, 01:03 PM
-
By poussin in forum Networking
Replies: 0
Last Post: 07-06-2003, 03:31 PM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Juniper SRX650 VPN Firewall Security Hub SRX650-BASE-SRE6-645AP w/SRX-GP-IM
$99.99
Juniper Networks EX3300-48P 48-Port PoE+ 4x SFP+ Network Switch w/ Power Cord
$43.95
Juniper EX4600-40F-AFI 24 SFP+/SFP Ports 4 QSFP+ Ports Dual AC Switch
$999.00
Juniper Networks EX4300-48T 48 Port Gigabit 4 QSFP 40G 2xPSU AFO Network Switch
$89.00
Juniper QFX5100-48S-3AFO Switch 48 x 10Gb SFP+, 6x QSFP 40GE, Dual AC Power
$499.00
JUNIPER EX3400-48P 48x 1GB PoE+ RJ-45 4x 10GB SFP+ 2x 40GB QSFP+, DUAL AC POWER
$210.00
Juniper EX3300-48P, 48 Port PoE+ Gigabit Network Switch w/ Power cord
$54.99
JUNIPER EX4550-32F-AFO 32-PORT ETHERNET SWITCH 2x POWER SUPPLY - TESTED
$299.99
Juniper Networks EX3300 EX3300-48P 48-Port Gigabit PoE+ Switch
$40.23