-
Reconfiguring LILO?
Hello,
(Here is another new-bee problem, this time with LILO)
There are two OSes on two seperate drives.
The first physical drive is 4Gb and has Knoppix (main partition + Swap).
The second drive has is 20Gb and has Win2k.
When Knoppix3.3 was installed on the 4Gb drive the other drive was unplugged.
Now when both drives are plugged and the machine boots LILO comes up but it does *not* list the Win2k (physical drive).
How can this be amended ?
Many Thanks in advance.
EDIT: I meant it the other way around: The first drive(master) is the 20Gb Win2k and the second(slave) one is the 4Gb Knoppix/Debian". Sorry about this.
-
check to see if Win2k is in your /etc/lilo.conf . it should be at the bottom. if it's not then add it. at the bottom of mine i have:
other=/dev/hda1
label="WindowsXP"
after you make your changes they will not take effect until after you actually run Lilo in /sbin . hope that helps.
-
Senior Member
registered user
If your windows drive is truly the second drive (slave on primary IDe channel) then you would need /dev/hdb1 in your lilo.conf for your windows partition.
-
Many thanks!
It worked.
The Win2K is on the Primary Master (hda1)
The Knoppix is on the Primary Slave (hdb1)
I changed the etc/lilo.conf to:
other=/dev/hda1
label=Windows2000
and then did sudo /sbin/lilo
Now Win2000 is listed when LILO shows up.
However, when I select Win2000 it doesn't boot into windows (it seems to hang)
Any ideas on that ?
-
massai, see rickenbacherus's comment (up two from here). He has the answer.
-
massai, see rickenbacherus's comment (up two from here). He has the answer.
??
but... the win2k is truly the primary *master* (not slave) ..
(it appears first during BIOS POST, it is configured via jumper as master and it is the end of the IDE cable)
The knoppix partition does indeed show up as hdb1
??
-
Oh... right... sorry.
We were looking at your original post where you said
The first physical drive is 4Gb and has Knoppix (main partition + Swap).
The second drive has is 20Gb and has Win2k.
Similar Threads
-
By cfish in forum Hdd Install / Debian / Apt
Replies: 0
Last Post: 05-08-2005, 05:35 AM
-
By tomjermy in forum Hardware & Booting
Replies: 1
Last Post: 03-17-2005, 01:07 AM
-
By Kowood in forum Hdd Install / Debian / Apt
Replies: 5
Last Post: 02-02-2005, 08:36 PM
-
By softgun in forum Hdd Install / Debian / Apt
Replies: 5
Last Post: 08-06-2004, 11:50 AM
-
By koselan in forum Hdd Install / Debian / Apt
Replies: 3
Last Post: 07-18-2003, 12:43 AM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Dell PowerEdge R730xd Server 2.60Ghz 32-Core 64GB 800GB SSD Debian Linux
$836.80
Watchguard XCS 570 Firewall SuperMicro 1U Server Intel 4GB VPN Router LINUX 🍁
$182.36
1U BareMetal pfsense opnsense Router Firewall DNS Server 6x 10GB Ethernet Ports
$149.00
PFSENSE 15" Depth Server Router Firewall Supermicro X11SSH-F E3-1240 V5 32GB RAM
$382.00
Domino Lotus Server 5.0.7 for OS/2 WSeB, RH Linux 6, Solaris, AIX, HP-UX, Win NT
$60.00
Red Hat Enterprise Linux 5 Server - New and Sealed
$16.99
2 x HP ProLiant BL460c (447707-B21) Blade Servers No RAM No HDD
$30.00
IBM CS821 20-Core 2.827GHz 128Gb 1.92Tb SSD 1U Linux Server - 8005-12N Power 8
$449.96
POGO Linux WEBWARE 1150 Rack-Mount Server Pentium 4 2.8GHz 512MB - No Drives
$179.99
8x 240GB SSD 1U Rackmount Deduplication Compression Backup RAID Server X10DRW-iT
$499.00