Page 1 of 3 123 LastLast
Results 1 to 10 of 24

Thread: My computer runs without M$

  1. #1
    Member registered user
    Join Date
    Dec 2003
    Location
    South Dakota
    Posts
    52

    My computer runs without M$

    Well I did it now.
    I was playing around with partitions on my hard drive, don't ask

    After I was done I could not boot up into win98 anymore.
    This is all on my older computer so I was not to worried.
    After playing around some more and still not being able to boot into win98 I thought who needs it

    So I formated my hard drive and M$ was gone forever.
    I booted to my Knoppix cd. I had the computer up and online in just a couple of minutes.

    All without any help from M$....

    --------------

    In the beginning there was darkness. The visions and aspirations of a human kind were bound to the physical world in the most primitive of fashions. And so people created machines to break their bondage. Born from silicon ashes, machines gave human kind the potential to dream without boundaries. This technologyh was good and there was light.

    Without a human dreamer the machine was nothing but silicon. And so operating systems were born to bridge the gap between human and machine. And much discoures ensued among the different operating systems. Even the finest of breeds bickered amongst themselves. And there was splintering, betrayal, lies, and greed.

    Slaves to their dreams, the people became slaves to their machines. Forced to salute with three fingers or speak in arcane and mystic tongues, the people learned to fear... even hate the machines.

    Out of this turmoil came hope.Knoppix

    -------------

    Happy Holiday's

  2. #2
    Senior Member
    Join Date
    Nov 2003
    Location
    Washington State
    Posts
    120
    Very nice

  3. #3
    Junior Member registered user
    Join Date
    Dec 2003
    Location
    Michigan
    Posts
    10
    w00t!

    I'm not to sure about going Linux-Only, only because I have MANY MANY Windows applications (games mostly) that I still use, so I'll probably set up a duel boot system (I asked many questions about it in my thread about the ethernet card )

  4. #4
    Senior Member
    Join Date
    Nov 2003
    Location
    Washington State
    Posts
    120
    I used to dual boot back in the days of 3.1; I never used windows so I chucked the drive.

  5. #5
    Senior Member registered user
    Join Date
    Jul 2003
    Posts
    692
    Spydie, I applaud your courage.

  6. #6
    Member registered user
    Join Date
    Oct 2003
    Posts
    80
    Well done, A word to the wise for those thinking to break the link to Windows. Make sure all your hardware is supported in linux first. There are many issues with various bits and peices. Unfortunately many manufacturers overlook the linux world.

  7. #7
    Senior Member registered user
    Join Date
    Nov 2002
    Location
    Long Island, NY, USA
    Posts
    1,256
    I personally only use KNOPPIX for some time now. I have to maintain dual-boot machines, however, for some of my users....

    Happy Holidays!

  8. #8
    Junior Member registered user
    Join Date
    Nov 2003
    Location
    Ottawa, Canada
    Posts
    25
    I only boot into windows to scan pictures, which is NOT very often. In the distant future I'll boot into it to verify that my cross-platform game works in Windows as well as Linux.

  9. #9
    Senior Member registered user
    Join Date
    Dec 2003
    Location
    Salt Lake City, UT, U.S.A.
    Posts
    1,338
    Welcome to Debian/Knoppix Spydie

    Glad you made it, pretty much, unscathed [giggle]

    The quote was very nice, I liked it. Some of it from Genesis, and, what I guess, a combination of Isaac Asimov and Rad Bradbury - I think

    You have a Wonderful, NON-Windows, Knoppix/Debian, Happy Hollidays too Spydie
    ( and to all the rest within the Knopper Community )

    Happy New (OS) Year,
    Cuddles

  10. #10
    Member registered user
    Join Date
    Dec 2003
    Location
    South Dakota
    Posts
    52
    Well I think I have the cfdisk working now. Ok, so it was always working and I just did not know how to use it

    I'm now copying the knoppix files to the hard drive so I don't have to run it from the cd anymore.

    It does work really great from the cd, but it will be nicer to have it run a bit faster and to be able to save other files to the hard drive again.

    I'm having more fun with my old computer and Knoppix then with the new Dell and winXP, Hmm.....

Page 1 of 3 123 LastLast

Similar Threads

  1. Remaster that runs under Windows
    By chris-uk in forum Customising & Remastering
    Replies: 2
    Last Post: 01-01-2005, 04:26 PM
  2. Runs great in German?
    By indylarry in forum General Support
    Replies: 2
    Last Post: 12-12-2004, 04:14 AM
  3. New Newbie !! How to make an ISO which runs ???
    By Juste in forum Customising & Remastering
    Replies: 2
    Last Post: 09-22-2004, 09:51 AM
  4. Runs as root in remaster?
    By TyphoonMentat in forum Customising & Remastering
    Replies: 3
    Last Post: 03-03-2004, 10:10 PM
  5. system clock runs fast
    By UselessPython in forum General Support
    Replies: 3
    Last Post: 11-16-2003, 08:13 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


HPE BL460c G10 ProLiant Blade | 2x Silver 4110 | 16GB | P204I | 2x300GB 10KRPM picture

HPE BL460c G10 ProLiant Blade | 2x Silver 4110 | 16GB | P204I | 2x300GB 10KRPM

$1419.00



HPE BL460c G10 ProLiant Blade | 2x Silver 4114 | 128GB | P204I | 2x1.2TB 10KRPM picture

HPE BL460c G10 ProLiant Blade | 2x Silver 4114 | 128GB | P204I | 2x1.2TB 10KRPM

$1869.00



HPE BL460c G10 ProLiant Blade | 2x Silver 4114 | 512GB | P204I | 2x1.2TB 10KRPM picture

HPE BL460c G10 ProLiant Blade | 2x Silver 4114 | 512GB | P204I | 2x1.2TB 10KRPM

$2699.00



Dell PowerEdge M620 0F9HJC Blade Server 2*E5-2670 2.60GHz 192GB RAM 2*300GB SAS picture

Dell PowerEdge M620 0F9HJC Blade Server 2*E5-2670 2.60GHz 192GB RAM 2*300GB SAS

$103.99



Dell PowerEdge M640 Blade Server 2x Xeon Gold 5122 3.6GHz, No RAM, READ _ picture

Dell PowerEdge M640 Blade Server 2x Xeon Gold 5122 3.6GHz, No RAM, READ _

$402.38



HP ProLiant BL460c G9 (Gen9) 2x E5-2670V3 12 Core 3.1GHz No Ram or No Drives picture

HP ProLiant BL460c G9 (Gen9) 2x E5-2670V3 12 Core 3.1GHz No Ram or No Drives

$59.98



Dell Poweredge M620 Blade Server 2x E5-2680 v2 2.8ghz 20-Cores / 256gb / H710 picture

Dell Poweredge M620 Blade Server 2x E5-2680 v2 2.8ghz 20-Cores / 256gb / H710

$499.99



Dell PowerEdge M630 Blade Server 1x Xeon E5-2630 v4 CPU / Motherboard P/N 0R10KG picture

Dell PowerEdge M630 Blade Server 1x Xeon E5-2630 v4 CPU / Motherboard P/N 0R10KG

$69.99



Dell PowerEdge FX2s CTO Blade 4 Slot 2U Chassis 2x 2000W picture

Dell PowerEdge FX2s CTO Blade 4 Slot 2U Chassis 2x 2000W

$399.00



Cisco UCS 5108 Blade Server Chassis Enclosure N20-C6508 4x PSU 8x Fans 2x Fabric picture

Cisco UCS 5108 Blade Server Chassis Enclosure N20-C6508 4x PSU 8x Fans 2x Fabric

$139.99