-
Reconfiguring LILO?
Hello,
(Here is another new-bee problem, this time with LILO)
There are two OSes on two seperate drives.
The first physical drive is 4Gb and has Knoppix (main partition + Swap).
The second drive has is 20Gb and has Win2k.
When Knoppix3.3 was installed on the 4Gb drive the other drive was unplugged.
Now when both drives are plugged and the machine boots LILO comes up but it does *not* list the Win2k (physical drive).
How can this be amended ?
Many Thanks in advance.
EDIT: I meant it the other way around: The first drive(master) is the 20Gb Win2k and the second(slave) one is the 4Gb Knoppix/Debian". Sorry about this.
-
check to see if Win2k is in your /etc/lilo.conf . it should be at the bottom. if it's not then add it. at the bottom of mine i have:
other=/dev/hda1
label="WindowsXP"
after you make your changes they will not take effect until after you actually run Lilo in /sbin . hope that helps.
-
Senior Member
registered user
If your windows drive is truly the second drive (slave on primary IDe channel) then you would need /dev/hdb1 in your lilo.conf for your windows partition.
-
Many thanks!
It worked.
The Win2K is on the Primary Master (hda1)
The Knoppix is on the Primary Slave (hdb1)
I changed the etc/lilo.conf to:
other=/dev/hda1
label=Windows2000
and then did sudo /sbin/lilo
Now Win2000 is listed when LILO shows up.
However, when I select Win2000 it doesn't boot into windows (it seems to hang)
Any ideas on that ?
-
massai, see rickenbacherus's comment (up two from here). He has the answer.
-
massai, see rickenbacherus's comment (up two from here). He has the answer.
??
but... the win2k is truly the primary *master* (not slave) ..
(it appears first during BIOS POST, it is configured via jumper as master and it is the end of the IDE cable)
The knoppix partition does indeed show up as hdb1
??
-
Oh... right... sorry.
We were looking at your original post where you said
The first physical drive is 4Gb and has Knoppix (main partition + Swap).
The second drive has is 20Gb and has Win2k.
Similar Threads
-
By cfish in forum Hdd Install / Debian / Apt
Replies: 0
Last Post: 05-08-2005, 05:35 AM
-
By tomjermy in forum Hardware & Booting
Replies: 1
Last Post: 03-17-2005, 01:07 AM
-
By Kowood in forum Hdd Install / Debian / Apt
Replies: 5
Last Post: 02-02-2005, 08:36 PM
-
By softgun in forum Hdd Install / Debian / Apt
Replies: 5
Last Post: 08-06-2004, 11:50 AM
-
By koselan in forum Hdd Install / Debian / Apt
Replies: 3
Last Post: 07-18-2003, 12:43 AM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
1U Supermicro Server 10 Bay 2x Intel Xeon 3.3Ghz 8C 128GB RAM 480GB SSD 2x 10GBE
$297.00
HPE ProLiant MicroServer Gen8 Intel Xeon E3-1265L 16GB ECC PCIe x16 4x1TB HDD
$249.99
HP ProLiant Xeon E3-1220L V2 MicroServer Gen8 2.30 GHz 16 GB RAM NO DRIVES
$199.99
HPE ProLiant MicroServer Gen10 Plus v2 Ultra Micro Tower Server - 1 x Intel Xeon
$846.19
SuperMicro Server 505-2 Intel Atom 2.4GHz 8GB RAM SYS-5018A-FTN4 1U Rackmount
$202.49
HP ProLiant HSTNS-5151 Micro Server 8GB RAM No Drives/Key/Caddies *READ*
$94.99
Supermicro 5018A-FTN4 Rack Server - Black
$125.00
HP ProLiant Microserver Micro Server HSTNS-5151 untested NO DRIVE CADDIES
$60.75
SUPERMICRO CSE-512 AMD Opteron Processor 6128, 32GB DDR3 RAM NO HDD
$90.00
1U 20" Short Depth Server Firewall PFSense X11SSH-F Xeon 3.5Ghz 32GB RAM NVME
$247.00