-
Reconfiguring LILO?
Hello,
(Here is another new-bee problem, this time with LILO)
There are two OSes on two seperate drives.
The first physical drive is 4Gb and has Knoppix (main partition + Swap).
The second drive has is 20Gb and has Win2k.
When Knoppix3.3 was installed on the 4Gb drive the other drive was unplugged.
Now when both drives are plugged and the machine boots LILO comes up but it does *not* list the Win2k (physical drive).
How can this be amended ?
Many Thanks in advance.
EDIT: I meant it the other way around: The first drive(master) is the 20Gb Win2k and the second(slave) one is the 4Gb Knoppix/Debian". Sorry about this.
-
check to see if Win2k is in your /etc/lilo.conf . it should be at the bottom. if it's not then add it. at the bottom of mine i have:
other=/dev/hda1
label="WindowsXP"
after you make your changes they will not take effect until after you actually run Lilo in /sbin . hope that helps.
-
Senior Member
registered user
If your windows drive is truly the second drive (slave on primary IDe channel) then you would need /dev/hdb1 in your lilo.conf for your windows partition.
-
Many thanks!
It worked.
The Win2K is on the Primary Master (hda1)
The Knoppix is on the Primary Slave (hdb1)
I changed the etc/lilo.conf to:
other=/dev/hda1
label=Windows2000
and then did sudo /sbin/lilo
Now Win2000 is listed when LILO shows up.
However, when I select Win2000 it doesn't boot into windows (it seems to hang)
Any ideas on that ?
-
massai, see rickenbacherus's comment (up two from here). He has the answer.
-
massai, see rickenbacherus's comment (up two from here). He has the answer.
??
but... the win2k is truly the primary *master* (not slave) ..
(it appears first during BIOS POST, it is configured via jumper as master and it is the end of the IDE cable)
The knoppix partition does indeed show up as hdb1
??
-
Oh... right... sorry.
We were looking at your original post where you said
The first physical drive is 4Gb and has Knoppix (main partition + Swap).
The second drive has is 20Gb and has Win2k.
Similar Threads
-
By cfish in forum Hdd Install / Debian / Apt
Replies: 0
Last Post: 05-08-2005, 05:35 AM
-
By tomjermy in forum Hardware & Booting
Replies: 1
Last Post: 03-17-2005, 01:07 AM
-
By Kowood in forum Hdd Install / Debian / Apt
Replies: 5
Last Post: 02-02-2005, 08:36 PM
-
By softgun in forum Hdd Install / Debian / Apt
Replies: 5
Last Post: 08-06-2004, 11:50 AM
-
By koselan in forum Hdd Install / Debian / Apt
Replies: 3
Last Post: 07-18-2003, 12:43 AM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Dell Poweredge R640 Server | 2x Gold 6140 | 512GB | H730P | 4x 2.4TB 10KRPM HDDs
$3995.00
CSE-118 Supermicro 1U GPU Server 2.6Ghz 28-C 128GB 2x Nvidia K40 GPU 2x1600W PSU
$580.03
Supermicro 4U 4x Nvidia GPU AI Server 2.1Ghz 16-Core 192GB 2x10G SFP+ 2x2200W
$1250.00
intel Xeon E5-2651 V2 E5-2696 V2 E5-2667 V2 E5-2695 V2 CPU Processor
$25.34
Intel Xeon E5-2680 v4 2.4GHz 35MB 14-Core 120W LGA2011-3 SR2N7
$17.99
Intel Xeon Gold 6140 SR3AX 2.3GHz 18-Core Processor CPU
$44.99
HP Z4G4 Intel Xeon W2133-3.6 GHz, 256 NVME, 6TB HDD, 32GB RAM P620 NO OS
$265.00
Intel Xeon E5-2697A V4 2.6GHz CPU Processor 16-Core Socket LGA2011 SR2K1
$39.99
DELL PowerEdge R730 Server 2x E5-2690v3 2.6GHz =24 Cores 32GB H730 4xRJ45
$274.00
Intel Xeon E5-2697 v2 2.7GHz 30M 12-Core LGA2011 CPU Processor SR19H
$27.99