Try at the boot: prompt the line knoppix xserver=XF86_SVGA xmodule=savage a page of other cheat codes you may want to try.Originally Posted by mperry2014
hello i need some help i am a newbie at linux and whenever i try to boot up from my knoppix cd it runs fine till the loading is finished, and then it goes black and wont show me anything. Then when I turn my comp off i get a glimce of the desktop and my comp goes off.
I have a 2.4 gighrtz, 120 gig HD, savage S3 32mg Video Card, 256mg Ram. Plz tell me how to fix this problem im guessing that it is the grafix but i dont know how to fix it plz help.
Try at the boot: prompt the line knoppix xserver=XF86_SVGA xmodule=savage a page of other cheat codes you may want to try.Originally Posted by mperry2014
that didnt help but i fiddled with it for about 2 hours and got it too work by using this command at the boot promt. "failsafe knoppix lang=us knoppix wheelmouse" thx to those who tried to help though i just thought id add how i fixed it so that anyone with a similar problem can maybe fix it.
Good to hear you got it going but you do not need the knoppix in the line when using failsafe you could boot with for your example failsafe lang=us wheelmouse.Originally Posted by mperry2014
Cisco Catalyst C9300-24UX-A 24 Port 10G/mGig Copper UPOE Network Switch
$475.00
Cisco 3560CG Series 8 Port POE Network Switch WS-C3560CG-8PC-S
$80.00
Cisco WS-C2960X-48FPD-L 48 V07 POE+ GE+2 10G SFP+, LAN BASE 740W w/ C2960X-Stack
$140.00
Cisco 2900 Series CISCO2901/K9 v06 Integrated Services Router
$39.99
🔥🔥🔥 CISCO SFP-10G-SR V03 10-2415-03 850nm 10GBASE-SR SFP+ Multi Module 🔥🔥🔥
$6.80
GENUINE Cisco SFP-10G-SR V03 SFP+ GBIC Transceiver Module 10-2415-03
$6.80
Cisco C3850-NM-2-10G 2 Port Network Exp.Module for 3850
$30.99
Cisco SFP-10G-SR 10-2415-03 10 Gigabit Transceiver LOT OF 10 @ C
$39.99
Cisco WS-C3560CX-12PC-S 12 Port GbE PoE IP Base Catalyst Managed Switch, TESTED
$174.00
Cisco WS-C3850-12X48U-S 48x (12x MultiGB) UPoE RJ-45 1x Mod Slot Switch, Tested
$259.00