-
Using a USB flash drive as RAM.....
Ok, heres that deal. I work at a major electronics store and we need to be able to back up data on laptops, but we do not have auth. to take that HDs out. So iv'e loaded knopptix under run level 2 "knopptix 2" at start up. Then I mount my hda1 (my win partition) and then I mount my smb drive and transfer my files over.
The problem comes when I have a laptop that has under 128 MB ram. Then I start getting ERRnomem errors. I figure this is because I'm using so much of te RAM as ramdisk.
So my question is: Can I use a USB flash drive as RAM in Linux??? I would repartition the drive, but many of the laptops I get have a bunch of bad sectors and that usually won't work.
How can I "partition" a USB flash drive as swap and how do I get the Linux box to recongnise it as system RAM?
THANKS in advance for any help.
-
Senior Member
registered user
You can probably use it as swap if you cfdisk it to the right type of filesystem for swap.
Knoppix would probably recognize it as /dev/sda1, so once you've made a partition on it of type swap with cfdisk, you'd then run these commands as root:
cfdisk /dev/sda
mkswap /dev/sda1
swapon -a
In fact, knoppix might detect it and use it as swapspace automatically thereafter.
-
Senior Member
registered user
I don't have a USB drive so this is nothing more than a stab in the dark......
cdrecord -scanbus
Hopefully your USB drive shows up there. If so it should be mountable something like /dev/sda
If you can mount it i would think that you could partition and format it.
cfdisk /dev/sda
mkswap /dev/sda1
swapon /dev/sad1
Then maybe (if you're really lucky) the next time you boot knoppix it might just see your swap and use it. Please post back either way as this is something I'd like to explore further in the future.
-
While it might be possible to format the USB drive to be swap, it is most likely not a good idea if the drive is a flash (pen/thumb) drive. Those drives have a very limited read/write speed (<10MBs). This would be VERY noticeable when using it to transfer files. Another very important limitation with these drives is that they have a limited erase cycle, most around 1,000,000 times. While this might seem like a lot (and it is for file storage) it is not enough to use as swap.
I apologize if the flash drives are not what you were talking about. If you were talking about a USB hard drive then I am right with you on that one. I think that a USB hard drive would be a great idea, and eliminate the partitioning problem that you are currently having.
Cheers,
Duffin
-
USB HD.
Hadn't thought of a USB HD. That would probebly do a much better job. Thanks for the tip.
Similar Threads
-
By jehan60188 in forum Hardware & Booting
Replies: 2
Last Post: 01-30-2005, 07:57 PM
-
By mjman in forum Hardware & Booting
Replies: 9
Last Post: 10-25-2004, 09:46 PM
-
By mmaarrcc in forum Hardware & Booting
Replies: 1
Last Post: 10-04-2004, 09:03 AM
-
By anhtran81 in forum Hdd Install / Debian / Apt
Replies: 2
Last Post: 01-18-2004, 12:22 PM
-
By ReaLity in forum General Support
Replies: 1
Last Post: 04-13-2003, 06:37 PM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
HP Workstation Z640 2x Xeon E5-2623V4 32GB Ram 2x 256GB SSD Quadro 2000 Linux GA
$249.99
Dell T7810 Workstation 1x E5-2603 v3 16GB RAM Nvidia QUADRO +cables
$120.00
Dell Precision 5810 Workstation Xeon E5-1650 6C 3.5GHz 16GB 500GB Win10 K2200
$115.94
HP Z230 Workstation Towers Xeon E3-1231 V3 3.20ghz 8GB Ram NO HDD
$39.96
SR1XP Intel Xeon E5-2680 v3 12 Core 30MB 2.5GHz LGA 2011-3 Grade A Processor
$3.87
Genuine Intel Xeon E5-2680V4 2.40Ghz 14-Core 35MB LGA2011 CPU P/N: SR2N7
$14.99
Intel Xeon E5-2699 v3 2.3GHz 18-Core 45MB 145W LGA2011-3 CPU/Processor SR1XD
$40.99
Intel Xeon Gold 6140 SR3AX 2.3GHz 18-Core Processor CPU
$32.79
Intel Xeon Gold 6146 3.2Ghz 12-Core 165W FCLGA3647 CPU/Processor SR3MA
$254.99
Dell Poweredge R730xd LFF 14-Bay 2U Server | Choose Your CPU & RAM Config
$489.99