netcardconfigOriginally Posted by LRutker
When on a dhcp network all works well.
How do I configure when I plug into a port that has a set IP address?
netcardconfigOriginally Posted by LRutker
Mind elaborating please?
Open a console window (clam shell icon on taskbar) and type in the above command hit enter key fill in the required information. If running from the hard drive then use su and enter key type in root password enter key again and go through the step above.Originally Posted by LRutker
As Stephen said, you can run it from a command window. You can also run it right from the Knoppix menu (it's under networking). I'm usually verbose in my posts, but this time didn't see much point; figured if you wanted detalis you would do a "man netcardconfig" and get them.Originally Posted by LRutker
You might want to read this thread for a solution that would let you use a static IP address and still boot up Knoppix from CD and use DHCP to configure it:
http://www.knoppix.net/forum/viewtopic.php?t=7020
Thanks
HITACHI HUS724040ALA640 4TB 7200RPM 64MB SATA 6.0Gb/s 3.5" HARD DRIVE ZERO HOURS
$52.00
Seagate ST1000VM002 1TB 64MB SATA6Gb/s 3.5" (Low Power) Hard Drive -PC, CCTV DVR
$24.99
Seagate ST12000NM0127 12TB SATA 6Gb/s 256MB 7200RPM 3.5" Enterprise Hard Drive
$99.99
Western Digital 4TB Internal 7.2KRPM 3.5" (WD4000FYYZ) SATA Hard Drive ZERO HOUR
$69.99
HGST Ultrastar DC HC520 12TB SATA 6Gb 256MB 3.5" Enterprise HDD- HUH721212ALE601
$74.99
CISCO A03-D1TBSATA 1TB 7.2K 6G 2.5INCH SATA HDD
$9.00
Seagate ST12000NM0127 12TB 256MB 7200RPM 3.5" SATA 6.0Gb/s Enterprise Hard Drive
$93.99
WD Ultrastar DC HC530 14TB SATA 6G 3.5" 7200RPM Enterprise HDD - WUH721414ALE604
$110.00
WD Ultrastar DC HC520 12TB SATA III 3.5" Enterprise HDD (HUH721212ALE600)
$100.00
Western Digital DC HC320 Ultrastar 8TB 7200RPM SATA HD, HUS728T8TALE6L4, 0B36404
$99.00