You unplug your speakers
Does anyone know how I can disable the "initiating starting sequence" and "initiating shutdown sequence" sounds WITHOUT remastering the image?
I could imagine it could be done by replacing a file from /etc at startup time with knoppix.sh, but don't know how exactly it can be done. (Reason: I want to run Knoppix on my notebook in quiet areas but don't want to turn off sound completey...)
Thanks!
You unplug your speakers
Inside the notebookOriginally Posted by stonent
/etc/X11/Xsession.d/45xsession
lines 87 to 99
but not sure about doing that without remastering..
thanks a lot! couldn't I just overwrite that file before it gets executed?
you could try, maybe in a knoppix.sh file.Originally Posted by probono
finally, I managed it:
first, I commented out the sound lines in 45xsession and xsession
second, I replace these files via knoppix.sh:
works perfect! (don't comment out the 'sleep 2' in the 45xsession)Code:# no startup sound rm -f /etc/X11/Xsession.d/45xsession cp /cdrom/KNOPPIX/45xsession /etc/X11/Xsession.d/ # no shutdown sound rm -f /etc/init.d/xsession cp /cdrom/KNOPPIX/xsession /etc/init.d/
Too bad there's no way to disable them without remastering the CD.
I love Knoppix. However, I always cringe when I'm demonstrating it on my portable, and the woman's voice booms out:"Startup sequence initiated," like some kind of Star Trek thing. And unfortunately, my volume controls don't work until you load an OS.
Hmm, maybe I should post a new topic about this. I doubt anyone would listen, but it's worth a try...
This is easy to do w/o remastering. Just do the following.
Boot into text modeRun xaumixCode:knoppix 2
Turn down the volume
Start X either with "startx" or "init 5"
The only disadvantage this has to the remastering option is that you have to repeat it, but then again you don't have to remaster.
Adam
I've not tried this but the thought is to use an awk/sed script in a knoppix.sh script to change those files mentioned earlier. You'd have to copy this to a floppy, usb dongle, or the systems HD but that would be it. You'd use the "knoppix myconfig=scan" boot codes but since theres no configs.tgz and just the knoppix.sh script, it's a quick boot and pretty much default.
You might be able to find the default audio volume file( from audio config setup ) and just create or change that to what it needs to be. It's the file created when you use the ControlCenter-Audio Settings.
It's not a "cheat code" only solution but should require just the knoppix.sh file.
HPGYT DELL 960GB SATA 6Gb/s 2.5in Internal SSD 0HPGYT MTFDDAK960TCB
$59.00
G5T03 Dell Intel DC S3700 Series 800GB SATA 6Gb/s 2.5" SSD 0G5T03 SSDSC2BA800G3E
$55.00
M.2 NVME SATA SSD Enclosure USB 3.2 Gen 2 10Gbps for M-Key or M+B Key SSD to 8TB
$40.86
ACASIS 2.5/3.5 inch 2 Bay SATA USB 3.0 Hard Drive Disk HDD SSD Enclosure 4 RAID
$58.99
Patriot P210 128GB 256GB 512GB 1TB 2TB 2.5" SATA 3 6GB/s Internal SSD PC/MAC Lot
$14.99
Micron 5100 MAX 120GB SATA 6Gb/s 2.5" Internal SSD MTFDDAK120TCC Solid State
$9.99
Intel DC S3510 Series 120GB SSD 2.5" 6Gb/s SATA Solid State Drive SSDSC2BB120G6K
$9.99
Netac 1TB 2TB 512GB Internal SSD 2.5'' SATA III 6Gb/s Solid State Drive lot
$13.99
Fanxiang SSD 512GB 1TB 2TB 4TB 2.5'' SSD SATA III Internal Solid State Drive lot
$198.99
Fanxiang 256GB 512GB 1TB 2TB 4TB Internal SSD 2.5" SATA III 6GB/s for PC/MAC Lot
$188.09