What does ifconfig -a return?
Thank you,
Joshua SS Miler
The Kernel seems to recognize the gigabit ethernet card and displays:
Intel(R) PRO/1000 Network Driver - version 3.1.23
Copyright etc...
It actually displays this twice. However when I try to config the interface:
ifconfig eth0 192.168.1.100 netmask 255.255.255.0
I get:
SIOCSIFADDR: No such device
eth0: ERROR while getting interface flags: No such device
SIOCSIFNETMASK: No such device
when I cat /proc/pci I can see the details of the NIC.
Any suggestions?
Thanks in advance.
What does ifconfig -a return?
Thank you,
Joshua SS Miler
Apparantly there are at least a few versions of this card, the verison I have is an onboard version on the Intel motherboard that comes with the GX260 from Dell. Anyway, the current version of the driver available on Intel's website works fine for my card. Unfortunately, many distributions that have this driver use the kernel code that is about a full release version behind (3.x instead of 4.x) Thanks for your suggestion, if I have any reason to boot into Knoppix again anytime soon I will try it and post the results here. However I was only trying to use knoppix to get a partimage system that would work with a lot of different hosts. Thanks again.
Seagate Exos X16 ST14000NM001G 14TB 512E SATA 6Gb/s 3.5" Enterprise Hard Drive
$157.99
WD 16TB Elements Desktop, Certified Refurbished Hard Drive - RWDBWLG0160HBK-NESN
$174.99
Seagate Exos X22 ST20000NM004E 20TB 512E SATA 6Gb/s 3.5" Enterprise Hard Drive
$268.99
$59.99
Seagate Exos 7E10 ST2000NM000B 2TB 7200RPM SATA 6.0Gb/s 3.5" Internal Hard Drive
$29.99
HGST Ultrastar DC HC520 12TB SATA 6Gb 256MB 3.5" Enterprise HDD- HUH721212ALE601
$82.99
HGST Ultrastar HE10 HUH721010ALE600 10TB SATA 6Gb/s 7200RPM 3.5" Enterprise HDD
$74.99
2 PACK Seagate ST1000LM035 Mobile HDD 1TB 2.5" SATA III Laptop Hard Drive
$27.25
Western Digital WD4000FYYZ RE 4TB 7200 RPM 64MB Cache SATA 6Gb/s 3.5" Hard Drive
$28.45
CISCO UCS-HD10T7KL4KN 10TB 7.2K 256MB 12GB SAS-3 3.5'' HUH721010AL4200 DRIVE
$249.97