What does ifconfig -a return?
Thank you,
Joshua SS Miler
The Kernel seems to recognize the gigabit ethernet card and displays:
Intel(R) PRO/1000 Network Driver - version 3.1.23
Copyright etc...
It actually displays this twice. However when I try to config the interface:
ifconfig eth0 192.168.1.100 netmask 255.255.255.0
I get:
SIOCSIFADDR: No such device
eth0: ERROR while getting interface flags: No such device
SIOCSIFNETMASK: No such device
when I cat /proc/pci I can see the details of the NIC.
Any suggestions?
Thanks in advance.
What does ifconfig -a return?
Thank you,
Joshua SS Miler
Apparantly there are at least a few versions of this card, the verison I have is an onboard version on the Intel motherboard that comes with the GX260 from Dell. Anyway, the current version of the driver available on Intel's website works fine for my card. Unfortunately, many distributions that have this driver use the kernel code that is about a full release version behind (3.x instead of 4.x) Thanks for your suggestion, if I have any reason to boot into Knoppix again anytime soon I will try it and post the results here. However I was only trying to use knoppix to get a partimage system that would work with a lot of different hosts. Thanks again.
1U Supermicro Server 10 Bay 2x Intel Xeon 3.3Ghz 8C 128GB RAM 480GB SSD 2x 10GBE
$297.00
HP ProLiant Xeon E3-1220L V2 MicroServer Gen8 2.30 GHz 16 GB RAM NO DRIVES
$199.99
HPE ProLiant MicroServer Gen10 Plus v2 Ultra Micro Tower Server - 1 x Intel Xeon
$846.19
HP ProLiant Xeon E3-1220L V2 2.30 GHz 16 GB RAM MicroServer Gen8 NO DRIVES
$199.99
HP ProLiant HSTNS-5151 Micro Server 8GB RAM No Drives/Key/Caddies *READ*
$94.99
SuperMicro Server 505-2 Intel Atom 2.4GHz 8GB RAM SYS-5018A-FTN4 1U Rackmount
$202.49
Supermicro 5018A-FTN4 Rack Server - Black
$125.00
SuperMicro RACK SERVER 502-2 5015A-H
$125.00
SUPERMICRO CSE-512 AMD Opteron Processor 6128, 32GB DDR3 RAM NO HDD
$90.00
1U Supermicro Server X10DRU-i+ 2x Xeon E5-2690 V4 28 Cores 64GB 4x 10GBE-T 2PS
$324.00