-
i can't access my windows partition or my 2nd cd
ok, first off, this is all using konquerer
ok, well under mnt it has folders of hda 1 through 3, the linux partition being 3, and all ofd the folders r empty. i was able to right click, hit "create new" > "hard drive..." and under the device tab i could only select /dev/hda3 and that allowed me to access what i already could, the linux partition. i couldn't get the hda1, windows, which was an empty folder under mnt. when i used knoppix from cd, it always had the icons on the decktop, now it doesn't have any.... i'm so lost...
please help
-
I am just getting started with Knoppix. I checked /etc/fstab file and the references to the other drives(like hda1) are commented out. So to get access to your other hard drives, use your favorite text editor, remove the "#" in front of the dives you want to activate. You will probibly want to change some of the options after the vfat entry on the line. To find out about these options run "man fstab" in a console. Hope this helps, I have not played with fstabs for a while or I would give you better instructions
-
Senior Member
registered user
Re: i can't access my windows partition or my 2nd cd
Originally Posted by
Chris
ok, first off, this is all using konquerer
ok, well under mnt it has folders of hda 1 through 3, the linux partition being 3, and all ofd the folders r empty. i was able to right click, hit "create new" > "hard drive..." and under the device tab i could only select /dev/hda3 and that allowed me to access what i already could, the linux partition. i couldn't get the hda1, windows, which was an empty folder under mnt. when i used knoppix from cd, it always had the icons on the decktop, now it doesn't have any.... i'm so lost...
please help
to have discs icons in the desktop
drag /mnt/hda1 over the desktop and then choose 'make a link here'
to view folders of /dev/hda1 write in a console
mount /dev/hda1
edit /etc/fstab if you know how but there is a menu way of doing this
in a console type (after conecting internet)
apt-get upgrade
apt-get install linuxconfig
the run
linuxconfig
chose filesystems
chose one (for ex. /dev/hda1) and then unmark "no mount at start up'
accept
Similar Threads
-
By knulle in forum General Support
Replies: 0
Last Post: 08-27-2004, 03:33 PM
-
By TheCyberDude in forum Tips and Tricks
Replies: 3
Last Post: 12-30-2003, 04:18 AM
-
By area in forum Hdd Install / Debian / Apt
Replies: 2
Last Post: 06-30-2003, 07:21 AM
-
By athlonthunder in forum General Support
Replies: 2
Last Post: 04-06-2003, 06:28 AM
-
By RdH in forum Hardware & Booting
Replies: 4
Last Post: 01-30-2003, 01:34 PM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Supermicro 4U 36 Bay Storage Server 2.4Ghz 8-C 128GB 1x1280W Rails TrueNAS ZFS
$712.98
HP ProLiant DL360 G9 Server | 2 x E5-2660V3 2.6Ghz | 64GB | 2 x 900GB SAS HDD
$339.00
Dell Poweredge R640 Server | 2x Xeon Gold 6132 | 128GB | H730P | 8x HDD Trays
$1849.00
Dell PowerEdge R7525 Server 24X2.5(8XNVME)+H745 2xEPYC 7302 CPU 128G RAM 2x2400W
$3350.00
Dell PowerEdge R620 Server 2x E5-2660 v1 2.2GHz 16 Cores 256GB RAM 2x 300GB HDD
$89.99
Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 128GB RAM No HDD
$389.99
Dell PowerEdge R720 Server - 2x8c CPU,256Gb RAM, 128Gb SSD/3x900Gb SAS, Proxmox
$340.00
HP Proliant DL360 Gen9 28 Core SFF Server 2X E5-2680 V4 16GB RAM P440ar No HDD
$196.95
DELL PowerEdge R730 Server 2x E5-2680v4 2.4GHz =28 Cores 32GB H730 4xRJ45
$284.00
1U Supermicro Server 10 Bay 2x Intel Xeon 3.3Ghz 8C 128GB RAM 480GB SSD 2x 10GBE
$297.00