-
i can't access my windows partition or my 2nd cd
ok, first off, this is all using konquerer
ok, well under mnt it has folders of hda 1 through 3, the linux partition being 3, and all ofd the folders r empty. i was able to right click, hit "create new" > "hard drive..." and under the device tab i could only select /dev/hda3 and that allowed me to access what i already could, the linux partition. i couldn't get the hda1, windows, which was an empty folder under mnt. when i used knoppix from cd, it always had the icons on the decktop, now it doesn't have any.... i'm so lost...
please help
-
I am just getting started with Knoppix. I checked /etc/fstab file and the references to the other drives(like hda1) are commented out. So to get access to your other hard drives, use your favorite text editor, remove the "#" in front of the dives you want to activate. You will probibly want to change some of the options after the vfat entry on the line. To find out about these options run "man fstab" in a console. Hope this helps, I have not played with fstabs for a while or I would give you better instructions
-
Senior Member
registered user
Re: i can't access my windows partition or my 2nd cd
Originally Posted by
Chris
ok, first off, this is all using konquerer
ok, well under mnt it has folders of hda 1 through 3, the linux partition being 3, and all ofd the folders r empty. i was able to right click, hit "create new" > "hard drive..." and under the device tab i could only select /dev/hda3 and that allowed me to access what i already could, the linux partition. i couldn't get the hda1, windows, which was an empty folder under mnt. when i used knoppix from cd, it always had the icons on the decktop, now it doesn't have any.... i'm so lost...
please help
to have discs icons in the desktop
drag /mnt/hda1 over the desktop and then choose 'make a link here'
to view folders of /dev/hda1 write in a console
mount /dev/hda1
edit /etc/fstab if you know how but there is a menu way of doing this
in a console type (after conecting internet)
apt-get upgrade
apt-get install linuxconfig
the run
linuxconfig
chose filesystems
chose one (for ex. /dev/hda1) and then unmark "no mount at start up'
accept
Similar Threads
-
By knulle in forum General Support
Replies: 0
Last Post: 08-27-2004, 03:33 PM
-
By TheCyberDude in forum Tips and Tricks
Replies: 3
Last Post: 12-30-2003, 04:18 AM
-
By area in forum Hdd Install / Debian / Apt
Replies: 2
Last Post: 06-30-2003, 07:21 AM
-
By athlonthunder in forum General Support
Replies: 2
Last Post: 04-06-2003, 06:28 AM
-
By RdH in forum Hardware & Booting
Replies: 4
Last Post: 01-30-2003, 01:34 PM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Cisco GLC-FE-100FX-RGD 100BASE-FX SFP Transceiver Module
$17.99
Cisco Meraki MA-SFP-1GB-SX 1000BASE-SX SFP Transceiver Module
$24.99
Cisco Meraki MA-SFP-10GB-SR 10G SFP+ SR 850nm 300m LC MMF
$29.99
CISCO SFP GLC-GE-100FX 10-2019-02 100Base-FX SFP GBIC Transceiver Module 1pcs
$52.99
Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver Module 10-2415-03
$8.00
SFP-10G-SR Original Cisco 10GBASE-SR SFP+ V02 Multi mode Transceiver 10-2415-02
$5.00
Brand New Cisco GLC-LH-SMD 1000BASE-LX/LH SFP Module 1310nm 10km SMF LC
$13.89
10Gbps 10GB SFP+SR transceiver for UniFi Switch 16 XG 16port Ubiquiti US-16-XG
$10.99
10 PCS Cisco GLC-LH-SMD 10-2625-01 1310nm SFP Transceiver Module
$85.00
New HP HPE Aruba J9150D 10G SFP+ LC SR 850nm 300m MMF XCVR Transceiver Module
$49.99