-
First try at open source, but missing a driver I think
Hi to everyone here. I took my first step toward open source tonight by trying to run Knoppix on an old 486 (with Win 95), not that i intend using it on that machine, I just wanted to see how it looked and worked. AFter figuring out how to make a boot floppy (no CD-ROM boot option in the BIOS--it's that old), things were going fine until the following:
Starting X11...root@tty1[/]#..
Retrying with Server XFree86 (vesa)
Error: No suitable X-server found for your card.
Retrying with Server XFree 86 (fbdev)._
That's where it stopped. I don't know anything yet about open source commands but I assume that a driver or some such thing wasn't available on the CD for a particula component. Is that the case, and if so, is it possible to get drivers for hardware that aren't included on the CD?
-
Junior Member
registered user
I dont know what video card you have, but you might try when the boot screen comes up typing in
knoppix screen=640x480
in case your board doesnt support superVGA. I dont know the use of other ouput related parms for knoppix. hopefully someone else will let you know.
-
Junior Member
registered user
It seems that X does not support whatever graphics card is in your box.
Take a look at http://www.xfree86.org/4.3.0/Status.html to see if it's supported.
It's probably not a good idea to try and run Knoppix on a 486 system anyway. It will run horribly slow.
-
Senior Member
registered user
I have a card that does this- a matrox pci card mystique 2 I think.
It works if I boot at low resolution usinga cheatcode-
knoppix screen=800x600
or in text mode with-
knoppix 2
-
As you've suggested, it's a very old graphics card that isn't supported. I'm getting another computer within the week which I'll be trying Knoppix and a few other distros on, so I'm not going to pursue the 486 anymore. I was just anxious to see how Knoppix looked and worked, and being new to open source, I didn't know what was happening when it stopped.
Thanks for the replies. I'm sure I'll have more questions in the near future. And thanks for the very useful link, tommydl, I saved it for future reference.
Edit: By the way, the card is Trident Super VGA if than means anything (I don't know the model and not willing to go into the box to find out since I'm getting another comp soon).
Similar Threads
-
By firefly2442 in forum The Lounge
Replies: 5
Last Post: 05-18-2005, 03:43 PM
-
By BillS in forum General Support
Replies: 0
Last Post: 05-05-2005, 02:35 PM
-
By j.drake in forum Ideas
Replies: 2
Last Post: 03-19-2004, 11:40 AM
-
By garyng in forum Customising & Remastering
Replies: 4
Last Post: 12-01-2003, 05:56 PM
-
By Tortoise in forum The Lounge
Replies: 6
Last Post: 07-18-2003, 01:58 AM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Dell PowerEdge R720 Server - 2x8c CPU,256Gb RAM, 128Gb SSD/3x900Gb SAS, Proxmox
$340.00
Supermicro 4U 36 Bay Storage Server 2.4Ghz 8-C 128GB 1x1280W Rails TrueNAS ZFS
$712.98
DELL PowerEdge R730XD 24x 2.5" Server Dual 750W Dual Heatsink - BareBones TESTED
$269.99
HP ProLiant DL360 G9 Server 2x E5-2660v3 2.60Ghz 20-Core 96GB P440ar
$304.35
Dell PowerEdge R620 Server 2x E5-2660 v1 2.2GHz 16 Cores 256GB RAM 2x 300GB HDD
$79.19
Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 128GB RAM No HDD
$389.99
Dell PowerEdge R720XD Xeon E5-2680 V2 2.8GHz 20 Cores 256GB RAM 12x4TB
$510.00
Server Asus x99 12 Bay 38TB Intel i7-6800K 64GB 6 RJ45 M.2 256GB Windows 10 Pro
$1199.99
HP ProLiant BL460c G9 (Gen9) 2x E5-2670V3 12 Core 3.1GHz No Ram or No Drives
$59.98
HP Proliant DL360 Gen9 1x E5-2620 V3 2.40GHZ 32GB DDR4-1866MHZ 2x 500W PSU
$105.95