-
no internet
when i ran knoppix from cd internet worked fine.. but after succesfull install my internet is gone..
i already have these lines in my interfaces file
Code:
auto eth0
iface eth0 inet dhcp
ips are done with dhcp. can anytone help me?
-
Not sure myself....
I've got the same problem and i have no real idea on how to fix it, but someone did mention that if you ran netcardconfig as root from a shell, it should help you get on to the internet...it does not seem to save this setting and the next time you boot you may have to run the command again. At least with me it doe not save the setting. It might save it for you.
Is there anyone out there who know how to fix this so I don't have to keep doing this at boot up?
-
Senior Member
registered user
If you do not have to use dhcp and you know the settings for you IP address, gateway etc. then just re-install and when the script asks you if you want to use dhcp click no enter your settings and when you re-boot you will be automatically connected. The dhcp did not seem to work for me so that's how I got it to work.
-
hdd install - no internet
I had same problem.
My system is external dial-up modem plus ethernet card for home network.
I could connect to my ISP with KPPP but could not access the web, email etc.
Solved problem by booting from Knoppix CD and copy the following files to the HDD install:-
/etc/resolve.conf
/etc/host.conf
/etc/hostname
/etc/hosts
/etc/hosts.allow
/etc/hosts.deny
/etc/network.interfaces.
After rebott, 'net access worked.
trueocker
-
I'm a newbie and saw the post which was what I was looking for. I tried netcardconfig in the command line and WHAM! I'm on line. I don't want to reinstall Knoppix as I've don't it too many times. I finallly have a Debian distro. It is better than Libranet. :P
Similar Threads
-
By Kung in forum Networking
Replies: 6
Last Post: 04-07-2004, 01:03 AM
-
By Expera in forum Hardware & Booting
Replies: 1
Last Post: 03-18-2004, 05:29 PM
-
By metroidprime13 in forum General Support
Replies: 10
Last Post: 03-01-2004, 06:58 PM
-
By oomzoo in forum General Support
Replies: 0
Last Post: 06-24-2003, 08:01 PM
-
By linux03 in forum General Support
Replies: 1
Last Post: 04-14-2003, 10:31 PM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Lot of 10pcs Brocade 57-1000012-01 8Gbps SWL 850nm SFP+ Optical Transceivers
$19.00
Cisco Meraki MA-SFP-1GB-SX 1000BASE-SX SFP Transceiver Module
$24.99
Cisco GLC-FE-100LX 100BASE-LX SFP Transceiver Module
$15.59
Cisco GLC-FE-100LX-RGD 100BASE-LX SFP Transceiver Module
$17.99
Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver Module 10-2415-03
$8.00
SFP-10G-SR Original Cisco 10GBASE-SR SFP+ V02 Multi mode Transceiver 10-2415-02
$5.00
Brand New Cisco GLC-LH-SMD 1000BASE-LX/LH SFP Module 1310nm 10km SMF LC
$13.89
Mellanox Original MFM1T02A-SR 10GbE 10GBASE-SR SFP+ Transceiver
$9.00
New Cisco GLC-LH-SMD 1000BASE-LX/LH SFP Module 1310nm 10km SMF LC
$14.49
LOT OF 20 Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver Module
$89.00