Update: fb1280x1024 works too. The screen is slightly flickery, but this is a big improvement over the 640x480 mode. PV
I've had the same problem when trying to run the CD on a shuttle SK41G system - this is a small formfactor system with a ton of on-motherboard stuff. Many distros refuse to even boot on the thing. Knoppix does though, but not as well as I would like in the graphical login department.
The first thing to do is to switch from the blank screen to an alternate window. If the last line in the CTRL-ALT-F1 window is 'Starting X11...', and going to one of the others (CTRL-ALT-F2 for example) gives you a root prompt, then the problem is simply with X11. I've found two ways to force something to come up when booting from the CD.
- use the 'knoppix screen=640x480' cheatcode.
- On the blank graphical window (CTRL-ALT-F5 if you switched!), press CTRL-ALT-KEYPAD+. Depending on the modes enabled at bootup (you can see this in CTRL-ALT-F1), you might need to do this more than once, until you land on the 640x480 setting. I have never been able to get any other resolution to work. NOTE: When you use this method, you end up with a small physical window on a larger virtual one. It gives me a headache.
Since my intent all along was to do a hard-disk install anyway, I went through that, and my hard-disk image doesn't show the X window either. So, I took a peek at /etc/XF86Config-4, and after removing the DDC-detected HorizSync and VertRefresh settings and killing the X11 server, BANG! up comes graphical login in 640x480. I say this is a smoking gun on detected video problems. The odd thing is, knoppix *is* properly detecting the onboard video (Savage8 KM266). It just doesn't seem to want to work with anything other than lifeboat default sync rates.
Anyone have other ideas? I really don't want to abandon my attempt to get Knoppix working on this hardware - Knoppix in a toaster box is such a cool thing! PV
Update: fb1280x1024 works too. The screen is slightly flickery, but this is a big improvement over the 640x480 mode. PV
Cisco Meraki MA-SFP-1GB-SX 1000BASE-SX SFP Transceiver Module
$24.99
Cisco GLC-FE-100FX-RGD 100BASE-FX SFP Transceiver Module
$17.99
Cisco GLC-GE-100FX 100BASE-FX SGMII SFP Transceiver Module
$83.99
Cisco SFP-10/25G-CSR-S 10/25GBASE-CSR SFP28, 850nm, 100m, LC,
$54.00
Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver Module 10-2415-03
$8.00
SFP-10G-SR Original Cisco 10GBASE-SR SFP+ V02 Multi mode Transceiver 10-2415-02
$5.00
10Gtek ASF-10G-T 10GBase-T 10GbE SFP+ to RJ-45 Copper Optical Transceiver Module
$35.99
Brand New Cisco GLC-LH-SMD 1000BASE-LX/LH SFP Module 1310nm 10km SMF LC
$13.89
LOT OF 20 Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver Module
$89.00
10 PCS Cisco GLC-LH-SMD 10-2625-01 1310nm SFP Transceiver Module
$85.00