Hi,
me again. I think i found the problem. It seems like kernel 2.6 isnt recognizing the LBA sectro numbers correctly. It sais i got only 234388333. But in fact there are 234441648 ogf them.
Can this problem be solved somehow?
I am using kernel 2.6.1 with the mm5 patch, a western digital 1200jb (120 gb) and ext3 as filesystem.
Now my problem is that when i'm working in Linux i suddenly get the error that the filesystem is read-only. A look into the log messages says:
dma_intr: error=0x10 { SectorIdNotFound}, LBAsect=234388333.
That sector number does not tell me anything.
But it seems that linux remounts the filesystem as read-only if an error occurs. Please correct me if i am wrong with that part.
Under kernel 2.4 i never had such an problem.
PLease help me.
I would really like to use 2.6
thx
Hi,
me again. I think i found the problem. It seems like kernel 2.6 isnt recognizing the LBA sectro numbers correctly. It sais i got only 234388333. But in fact there are 234441648 ogf them.
Can this problem be solved somehow?
I think you may have found a bug I am using the -mm4 patch here on my test partition and it gets detected properly.Originally Posted by debi
So you may want to drop back to the -mm4 and see if you get the same behavior. Oh I use reiserfs on the drive but that should make no difference.Code:hda: WDC WD1200JB-32EVA0, ATA DISK drive hdb: MAXTOR 4K040H2, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hdc: IRQ probe failed (0xffffbeba) hdc: HL-DT-ST DVDRAM GSA-4040B, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 1024KiB hda: 234441648 sectors (120034 MB) w/8192KiB Cache, CHS=16383/255/63, UDMA(100) hda: hda1 hda2 hda3 hda4 < hda5 hda6 > hdb: max request size: 128KiB hdb: 78198750 sectors (40037 MB) w/2000KiB Cache, CHS=65535/16/63, UDMA(100) hdb: hdb1 hdb2 hdb3 hdb4 ide-floppy driver 0.99.newide ide-scsi is deprecated for cd burning! Use ide-cd and give dev=/dev/hdX as device scsi0 : SCSI host adapter emulation for IDE ATAPI devices Vendor: HL-DT-ST Model: DVDRAM GSA-4040B Rev: A104 Type: CD-ROM ANSI SCSI revision: 02 [06:43 PM Sat Jan 24: stephen @ ~] >$ uname -a Linux HappyTux 2.6.1-mm4.040119 #1 Mon Jan 19 03:21:10 AST 2004 i686 GNU/Linux
hda: Host Protected Area detected.
current capacity is 234375000 sectors (120000 MB)
native capacity is 234441648 sectors (120034 MB)
hda: 234375000 sectors (120000 MB) w/8192KiB Cache, CHS=65535/16/63
What does this "Host Protected Area decteted" mean?
I tried it already without any mm patch. The same problem.
Western Digital 1TB Caviar WD1002FBYS Enterprise SATA Hard Disk Drives
$24.99
Western Digital 1TB WD Blue PC Desktop 3.5'' Internal CMR Hard Drive - WD10EARZ
$44.99
Western Digital WD1003FBYX 3.5” 7200 RPM 1TB SATA Hard Drive
$29.99
Western Digital 1TB WD Blue SA510 SATA SSD Internal 2.5”/7mm Cased - WDS100T3B0A
$89.99
Patriot P210 128GB 256GB 512GB 1TB 2TB 2.5" SATA 3 6GB/s Internal SSD PC/MAC Lot
$19.99
1000 GB HHD 2.5" 1TB Mixed Brands Samsung WD HGST TOSHIBA, Tested Formatted
$14.90
2 PACK Seagate ST1000LM035 Mobile HDD 1TB 2.5" SATA III Laptop Hard Drive
$26.85
Samsung - Geek Squad Certified Refurbished 980 PRO 1TB Internal SSD PCIe Gen ...
$71.99
1TB/2TB USB 3.0 Flash Drive Thumb U Disk Memory Stick Pen PC Laptop Storage lot
$580.99
Type C USB 3.0 Flash Drive Thumb Drive Memory Stick for PC Laptop 1TB 2TB lot
$703.19