Hi,
me again. I think i found the problem. It seems like kernel 2.6 isnt recognizing the LBA sectro numbers correctly. It sais i got only 234388333. But in fact there are 234441648 ogf them.
Can this problem be solved somehow?
I am using kernel 2.6.1 with the mm5 patch, a western digital 1200jb (120 gb) and ext3 as filesystem.
Now my problem is that when i'm working in Linux i suddenly get the error that the filesystem is read-only. A look into the log messages says:
dma_intr: error=0x10 { SectorIdNotFound}, LBAsect=234388333.
That sector number does not tell me anything.
But it seems that linux remounts the filesystem as read-only if an error occurs. Please correct me if i am wrong with that part.
Under kernel 2.4 i never had such an problem.
PLease help me.
I would really like to use 2.6
thx
Hi,
me again. I think i found the problem. It seems like kernel 2.6 isnt recognizing the LBA sectro numbers correctly. It sais i got only 234388333. But in fact there are 234441648 ogf them.
Can this problem be solved somehow?
I think you may have found a bug I am using the -mm4 patch here on my test partition and it gets detected properly.Originally Posted by debi
So you may want to drop back to the -mm4 and see if you get the same behavior. Oh I use reiserfs on the drive but that should make no difference.Code:hda: WDC WD1200JB-32EVA0, ATA DISK drive hdb: MAXTOR 4K040H2, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hdc: IRQ probe failed (0xffffbeba) hdc: HL-DT-ST DVDRAM GSA-4040B, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 1024KiB hda: 234441648 sectors (120034 MB) w/8192KiB Cache, CHS=16383/255/63, UDMA(100) hda: hda1 hda2 hda3 hda4 < hda5 hda6 > hdb: max request size: 128KiB hdb: 78198750 sectors (40037 MB) w/2000KiB Cache, CHS=65535/16/63, UDMA(100) hdb: hdb1 hdb2 hdb3 hdb4 ide-floppy driver 0.99.newide ide-scsi is deprecated for cd burning! Use ide-cd and give dev=/dev/hdX as device scsi0 : SCSI host adapter emulation for IDE ATAPI devices Vendor: HL-DT-ST Model: DVDRAM GSA-4040B Rev: A104 Type: CD-ROM ANSI SCSI revision: 02 [06:43 PM Sat Jan 24: stephen @ ~] >$ uname -a Linux HappyTux 2.6.1-mm4.040119 #1 Mon Jan 19 03:21:10 AST 2004 i686 GNU/Linux
hda: Host Protected Area detected.
current capacity is 234375000 sectors (120000 MB)
native capacity is 234441648 sectors (120034 MB)
hda: 234375000 sectors (120000 MB) w/8192KiB Cache, CHS=65535/16/63
What does this "Host Protected Area decteted" mean?
I tried it already without any mm patch. The same problem.
Cisco QSFP-100G-LR4-S 100GBASE-LR4 QSFP28, 1310nm, 10km, LC, SMF
$335.99
Cisco SFP-10/25G-CSR-S 10/25GBASE-CSR SFP28, 850nm, 100m, LC,
$54.00
Cisco SFP-10G-BX40D-I 10GBASE-BX-D BiDi SFP+, 1330nm-TX/1270nm-RX, 40km, LC, SMF
$59.99
Cisco SFP-10G-T-X 10GBASE-T SFP+, 80m@Cat6a/Cat7, Copper, RJ45
$83.99
Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver Module 10-2415-03
$8.00
NEW Sealed Cisco SFP-10G-LR 10GBASE-LR SFP+ 1310nm 10km *US Shipping*
$18.00
Brand New Cisco GLC-LH-SMD 1000BASE-LX/LH SFP Module 1310nm 10km SMF LC
$13.89
Genuine Cisco SFP-10G-SR Transceiver Module (10-2415-03)
$5.85
LOT OF 20 Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver Module
$89.00
Cisco 10G SFP+ Module SFP-10G-SR 10-2415-03 (Lot of 5)
$24.99