it's me again. I checked this:
I suppose it should be something else than this ?Code:root@paula:/proc/asound# tail /proc/asound/cards --- no soundcards ---
\thomsen
I have trouble with my Yamaha soundcard (ymfpci, ym744, hoontech xg). I've connected it using an spdif to my reciever. All i have to do is to unmute some channels using alsamixer. But it won't work.
What can I check now? I have played around with self built driver from www.alsa-project.org and the apt-get port form testing.Code:root@paula:/etc/init.d# ./alsa-autoconfig Preparing modules for alsa... Building card database.. Configuring ymfpci... Running update-modules... Creating snddevices... Setting default volumes... root@paula:/etc/init.d# alsamixer alsamixer: function snd_ctl_open failed for default: No such file or directory
Well this make be feel dizzy.. I spent the whole day and can't start alsamixer. It suxxs.
\thomsen
it's me again. I checked this:
I suppose it should be something else than this ?Code:root@paula:/proc/asound# tail /proc/asound/cards --- no soundcards ---
\thomsen
ahja. Some good news:
I've found out that in
always the "ymfpci" was loaded. This probably wrong. Then when doing this:Code:/etc/modules
everything went fine. So my solution was: Removing the wrong entry and let the programs itself load the module when needed! So just comment out "ymfpci" and try it again.Code:% rmmod ymfpci % modprobe snd-ymfpci % alsamixer
But this brings a new problem to me: How can I store/configure the volume settings using knoppix only? The problem is:
won't work, since alsa-utils aren't installed. So any comments on this?Code:% amixer set bla bla
Please try add
to /etc/init.d/bootmisc.shCode:aumix -w 60 -v 60
thx for your suggestion. However, it did not solve the problem this way. But it brought some new ideas to me. I could remember, that the alsa-util "amixer" was able to activate the IEC958 (spdif) . However, all those simple mixer programs, including "aumix" were'nt able to activate this very unique sound channel form my Hoontech XG yamaha chipset.Originally Posted by NikiBob
The solution: download the alsa-util package using the "-d" option from apt-get, which will only download but NOT install the package. If downloaded, depack it your self and install "amixer" by hand. Then you put this in bootmisc.sh
and voila, everything is fine. But don't forget to add your local user to the audio group in /etc/groupCode:%amixer -q set IEC958 on
\thomsen
Cisco Nexus 48-Port 10G SFP+ Switch N9K-9396PX w/ 9K-M12PQ 12-Port 40G QSFP
$419.99
Lot of 10pcs Brocade 57-1000012-01 8Gbps SWL 850nm SFP+ Optical Transceivers
$19.00
Cisco GLC-FE-100FX-RGD 100BASE-FX SFP Transceiver Module
$17.99
Extreme Networks 25G SFP28 SR Lite-FEC 850nm 10502 AVAGO AFBR-725TMZ-EX1
$109.00
Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver Module 10-2415-03
$8.00
SFP-10G-SR Original Cisco 10GBASE-SR SFP+ V02 Multi mode Transceiver 10-2415-02
$5.00
Brand New Cisco GLC-LH-SMD 1000BASE-LX/LH SFP Module 1310nm 10km SMF LC
$13.89
Genuine Cisco SFP-10G-SR Transceiver Module (10-2415-03)
$5.85
New Cisco w/ Hologram SFP-10/25G-CSR-S 10/25GBASE-CSR SFP28 Transceiver Module
$69.99
New HP HPE Aruba J9150D 10G SFP+ LC SR 850nm 300m MMF XCVR Transceiver Module
$49.99