No answers?
Ok i'm totally new to linux and all of that stuff so this might be a newbie question.
KNOPPIX_V3.3-2003-11-14-EN wouldn't load from cd at all so i created a boot floppy.
So I start, and the floppy is excepted and starts to boot, the pinguin is visible and all those config things are starting, than comes the full screen knoppix logo and after a while (+/- 1min) it dissapears and goes back to the pinguin and boot/config stuff.
It says: Remove cd, close cdtray and hit RETURN or something,
When i've done that it shutsdown, just what it said it was going to do.
What do I have to do?
sorry for my english(I'm Dutch)
Thx in advance,
gerjan
//EDIT system specs:
PIII 540mhz 512kb cache
320mb sdram 133mhz
nvidia tnt2 m64 32mb
Standard Soundblaster sound card
Standard usb keyboard/mouse
Winxp pro
No answers?
Can you get it running in text-only mode by typing "knoppix 2" at the boot prompt ?
If that doesn't work you could check that the CD is ok by typing "knoppix testcd" instead.
Seagate Exos X16 (7200RPM, 3.5", SATA III, 256MB Cache) 16TB Internal Enterprise
$110.00
Seagate ST8000NM0055 8TB 7200RPM 256MB SATA 6.0 Gb/s 3.5" Enterprise Hard Drive
$41.62
HITACHI HUS724040ALA640 4TB 7200RPM 64MB SATA 6.0Gb/s 3.5" HARD DRIVE ZERO HOURS
$52.00
HGST Ultrastar DC HC520 12TB SATA 6Gb 256MB 3.5" Enterprise HDD- HUH721212ALE601
$79.99
Seagate ST12000NM0127 12TB 256MB 7200RPM 3.5" SATA 6.0Gb/s Enterprise Hard Drive
$93.99
WD Ultrastar DC HC530 14TB SATA 6G 3.5" 7200RPM Enterprise HDD - WUH721414ALE604
$110.00
HGST Ultrastar HE10 10TB SATA 6.0Gb/s 7200 3.5" Datacenter HDD - HUH721010ALE601
$79.99
CISCO A03-D1TBSATA 1TB 7.2K 6G 2.5INCH SATA HDD
$9.00
Western Digital DC HC320 Ultrastar 8TB 7200RPM SATA HD, HUS728T8TALE6L4, 0B36404
$99.00
Seagate ST1000VM002 1TB 64MB SATA6Gb/s 3.5" (Low Power) Hard Drive -PC, CCTV DVR
$24.99