OK, I answered my own question.
Knoppix: screen=640x480
works.
Thanks anyway.
I put my brand new Knoppix 3.3 CD-R into my old Gateway Pentium II. Everything seemed to be coming up fine until the CRT screen started rolling and wouldn't stop. About the last thing that the CRT displayed before it started rolling was Starting X11, then the CRT clicked, seemed to turn off, and came back on rolling and unreadable. After reading other messages here, I tried:
boot: knoppix lang=us vga=normal
and
boot: knoppix failsafe
both with the same result.
According to the Belarc Advisor, the display is:
STB Velocity 128 (Display Adapter)
Standard VGA 640x480 (Monitor)
The system starts up just fine; what can I do to keep it working???
Thanks for any response.
OK, I answered my own question.
Knoppix: screen=640x480
works.
Thanks anyway.
Also try vga=normal.
But if screen... works, then that's good.
- Ambrose
HP ProLiant DL360 G9 Server | 2 x E5-2660V3 2.6Ghz | 64GB | 2 x 900GB SAS HDD
$339.00
H261-Z61 2U 24SFF AMD Server 8x EPYC 7551 256-Cores 256GB RAM 8x25G NIC 2x2200W
$2612.18
Dell PowerEdge R730 8 SFF 2x E5-2660 v4 28 Cores 128/256GB 0/3x 900GB 6Gbps H730
$349.99
Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 128GB RAM No HDD
$389.99
Dell PowerEdge R620 Server 2x E5-2660 v1 2.2GHz 16 Cores 256GB RAM 2x 300GB HDD
$79.19
HP Proliant DL360 Gen9 28 Core SFF Server 2X E5-2680 V4 16GB RAM P440ar No HDD
$196.95
Dell PowerEdge R720XD Xeon E5-2680 V2 2.8GHz 20 Cores 256GB RAM 12x4TB
$510.00
HP ProLiant DL380 Gen9 16SFF 2x E5-2680v4 2.4GHz =28 Cores 64GB P840 4xRJ45
$353.00
DELL R730XD Server 2x E5-2680v4 2.4GHz =28 Cores 128GB H730 4x 1.2TB SAS 4xRJ45
$504.00