OK, I answered my own question.
Knoppix: screen=640x480
works.
Thanks anyway.
I put my brand new Knoppix 3.3 CD-R into my old Gateway Pentium II. Everything seemed to be coming up fine until the CRT screen started rolling and wouldn't stop. About the last thing that the CRT displayed before it started rolling was Starting X11, then the CRT clicked, seemed to turn off, and came back on rolling and unreadable. After reading other messages here, I tried:
boot: knoppix lang=us vga=normal
and
boot: knoppix failsafe
both with the same result.
According to the Belarc Advisor, the display is:
STB Velocity 128 (Display Adapter)
Standard VGA 640x480 (Monitor)
The system starts up just fine; what can I do to keep it working???
Thanks for any response.
OK, I answered my own question.
Knoppix: screen=640x480
works.
Thanks anyway.
Also try vga=normal.
But if screen... works, then that's good.
- Ambrose
Cisco WS-C3560-48PS-S 48-Port Managed Gigabit PoE Switch
$56.00
Cisco SG95-16 16-Port Gigabit Switch SG95-16-KR
$47.00
Cisco WS-C3650-48FD-S 48-Port Gigabit Managed Switch
$49.99
Cisco WS-C2960-48PST-L 48 pport PoE Manageable Switch
$55.00
HP 2530-48G 48 Port Gigabit Ethernet Network Switch J9775A
$30.95
New Linksys SE3005 5-port Gigabit Ethernet Switch
$18.99
Linksys SE3008 8 Ports Rack Mountable Gigabit Ethernet Switch
$21.99
HP ProCurve 2530-24G J9776A 24 Port Gigabit Ethernet Managed Network Switch
$34.99
HP JG937A Flexnetwork 5130-48G PoE+ 48-Port Gigabit Network Switch
$65.95
Juniper Networks EX3300-48P 48-Port PoE+ 4x SFP+ Network Switch w/ Power Cord
$43.95