OK, I answered my own question.
Knoppix: screen=640x480
works.
Thanks anyway.
I put my brand new Knoppix 3.3 CD-R into my old Gateway Pentium II. Everything seemed to be coming up fine until the CRT screen started rolling and wouldn't stop. About the last thing that the CRT displayed before it started rolling was Starting X11, then the CRT clicked, seemed to turn off, and came back on rolling and unreadable. After reading other messages here, I tried:
boot: knoppix lang=us vga=normal
and
boot: knoppix failsafe
both with the same result.
According to the Belarc Advisor, the display is:
STB Velocity 128 (Display Adapter)
Standard VGA 640x480 (Monitor)
The system starts up just fine; what can I do to keep it working???
Thanks for any response.
OK, I answered my own question.
Knoppix: screen=640x480
works.
Thanks anyway.
Also try vga=normal.
But if screen... works, then that's good.
- Ambrose
LSI 9305-16i SATA SAS 12Gbs RAID Controller PCIe 3.0 x8 IT-Mode 4* 8643 SATA
$229.99
HPE 843201-001 SMART ARRAY P840ar/2GB 12Gb/s FBWC SAS RAID CONTROLLER BOARD
$345.60
HPE 848147-001 NEW SMART ARRAY P840ar/2GB 12Gb/s FBWC SAS RAID CONTROLLER BOARD
$363.60
HPE 843199-B21 SMART ARRAY P840ar/2GB 12Gb/s FBWC SAS RAID CONTROLLER BOARD
$355.50
Inspur LSI 9300-8i Raid Card 12Gbps HBA HDD Controller High Profile IT MODE
$15.98
LSI MegaRAID 9361-8i 12Gb PCIe 8-Port SAS/SATA RAID 1Gb w/BBU/CacheVault/License
$35.96
ORICO Multi Bay RAID Hard Drive Enclosure USB 3.0/ Type-C For 2.5/3.5'' HDD SSDs
$86.99
LSI MegaRAID 9361-8i 12Gbps PCIe 3 x8 SATA SAS 3 8 Port RAID + BBU & CacheVault
$39.00
Yottamaster 5 Bay RAID Hard Drive Enclosure USB3.1 Type C 2.5"/3.5" SATA HDD SSD
$142.49
ACASIS 2.5/3.5 inch 2 Bay SATA USB 3.0 Hard Drive Disk HDD SSD Enclosure 4 RAID
$58.99