OK, I answered my own question.
Knoppix: screen=640x480
works.
Thanks anyway.
I put my brand new Knoppix 3.3 CD-R into my old Gateway Pentium II. Everything seemed to be coming up fine until the CRT screen started rolling and wouldn't stop. About the last thing that the CRT displayed before it started rolling was Starting X11, then the CRT clicked, seemed to turn off, and came back on rolling and unreadable. After reading other messages here, I tried:
boot: knoppix lang=us vga=normal
and
boot: knoppix failsafe
both with the same result.
According to the Belarc Advisor, the display is:
STB Velocity 128 (Display Adapter)
Standard VGA 640x480 (Monitor)
The system starts up just fine; what can I do to keep it working???
Thanks for any response.
OK, I answered my own question.
Knoppix: screen=640x480
works.
Thanks anyway.
Also try vga=normal.
But if screen... works, then that's good.
- Ambrose
N85XX DELL 3.84TB SAS 12GB/S ENTERPRISE SOLID STATE DRIVE (W/ 14TH GEN CADDY)
$389.95
Western Digital 1TB WD Blue SA510 SATA SSD Internal 2.5”/7mm Cased - WDS100T3B0A
$89.99
Western Digital 250GB WD Blue SA510 SATA SSD, Internal M.2 2280 - WDS250G3B0B
$39.99
WD 500GB My Passport SSD, Portable External Solid State Drive WDBAGF5000ARD-WESN
$59.99
Patriot P210 128GB 256GB 512GB 1TB 2TB 2.5" SATA 3 6GB/s Internal SSD PC/MAC Lot
$14.99
Micron 5100 MAX 120GB SATA 6Gb/s 2.5" Internal SSD MTFDDAK120TCC Solid State
$9.89
Netac 1TB 2TB 512GB Internal SSD 2.5'' SATA III 6Gb/s Solid State Drive lot
$13.99
Fanxiang SSD 512GB 1TB 2TB 4TB 2.5'' SSD SATA III Internal Solid State Drive lot
$13.99
M.2 NVMe SSD 128GB 256GB 512GB Single Notch with Windows Installed 10 / 11
$85.25
Fanxiang M.2 SATA SSD 2TB 1TB 512GB 256GB SSD Internal M2 Solid State Drive Lot
$109.99