If you can boot with the regular knoppix cd, just use "dmesg"!
I have build a 2.4.24 kernel with the serial console built-in, and have remastered my KNOPPIX CD to use isolinux. I have added "serial 1 9600" to my isolinux.cfg, and have added "console=ttyS1,9600n8" to the append line of all kernels. Also I have modified the inittab to put a serial console on ttyS0 and ttyS1. Isolinux on boot will output to serial, once the kernel is loaded I get no more output until getty is started by init and I am able to log in.
I need to be able to see what is going on during boot. Any ideas??
Thanks
Tim
If you can boot with the regular knoppix cd, just use "dmesg"!
Yes I could use dmesg, but I need the capability of seeing the boot processes through the serial port. The machine that will be using this remastered version will be headless and w/o a video card.
~DAILY DEALZ~ 14" HP EliteBook Laptop PC: Intel i5 8GB RAM 256GB SSD Webcam
$199.49
Team T-FORCE VULCAN Z 16GB (2 x 8GB) 288-Pin PC RAM DDR4 3200 (PC4 25600) Intel
$35.99
A-Tech 8GB DDR3 1600 PC3-12800 Laptop SODIMM 204-Pin Memory RAM PC3L DDR3L 1x 8G
$13.99
HyperX FURY RAM DDR4 16GB 8GB 32GB 4GB 3200 2666 2400 2133 Desktop Memory DIMM
$15.85
A-Tech 8GB PC3-12800 Desktop DDR3 1600 MHz Non ECC 240-Pin DIMM Memory RAM 1x 8G
$13.99
A-Tech 16GB 2 x 8GB PC3-12800 Laptop SODIMM DDR3 1600 Memory RAM PC3L 16G DDR3L
$27.98
G.SKILL Trident Z RGB 16GB 2x 8GB 3200MHz DDR4 Desktop RAM F4-3200C16S-8GTZR
$38.99
CORSAIR Vengeance LPX 32GB (2 x 16GB) 288-Pin PC RAM DDR4 3200 (PC4 28800)
$39.00
Crucial 16GB (2x 8GB) Kit DDR3 1600MHz PC3-12800 UDIMM Desktop 240-Pin CL11 RAM
$21.95
Corsair Vengeance 32GB 16GB 8GB DDR3 1600MHz 1866MHz 2133MHz 2400MHz Memory LOT
$79.99