I think there is a bug in this version. When installed to HD, it seems that it tries to load modules for the 2.4.20 kernel, and it fails.
Then TV card doesn't work, you can't access ext3 partiones, etc...
The correct address is:
http://www.boegenielsen.dk:6969/
I think there is a bug in this version. When installed to HD, it seems that it tries to load modules for the 2.4.20 kernel, and it fails.
Then TV card doesn't work, you can't access ext3 partiones, etc...
Hi,
I have problem with this version 3.3. My graphic card chipset is SiS (SiS 630). Knoppix 3.3 from 2003.11.19 and 3.2, 3.1 worked very correctly. After installation on hdd, by trying "startx" I have communicates:
sisfb: Fatal error: Unable to reserve frame buffer memory
/lib/modules/2.4.24-xfs/kernel/drivers/video/sis/sisfb.o: init_module: No such device
/lib/modules/2.4.24-xfs/kernel/drivers/video/sis/sisfb.o insmod sis failed
Command "dmesg |grep error shows:
usbdevfs: remount parameter error
sisfb: Fatal error: Unable to reserve frame buffer memory
sisfb: Fatal error: Unable to reserve frame buffer memory
What can I do ??
Regards. Larry
I have the same problem on a Clevo 2200S with graphic card chipset SIS630 and only with this last Knoppix 3.3 version.
Klaudio
I just ordered a CD from CheapBytes. BTW, I'm now "dual booted" Knoppix (installed to a hard drive partition) and Gentoo. Gentoo has KDE 3.2 working. They're catching up with Debian rapidly in terms of packaging, although their "Live CD" isn't (as of 1.4) compressed, so they don't have 2 GB of software on it.Originally Posted by probono
Better use a newer KNOPPIX (new version 2004-02-16 with bug fixes) as it addresses issues with hard disk installations:
http://www.boegenielsen.dk:6969
I also have a laptop with Sis630 graphics chipset, it used to work no problem with knoppix, up to 3.3. since later version of 3.3 I get a blank screen if it starts xfree86. after looking at the current boot sequence and the previous boot sequence, it seems it used to detect my 630 graphics card and use the vesa server, now it detects my 630 and tries to use the sis server, which doesnt seem to work on this sis630. so I tried typing knoppix xmodule=vesa at the boot prompt and low and behold all works again. anyone got any ideas why the sis server gives a blank screen on a sis630 chipset? I dont care that much now I've solved it, I may lose some hardware acceleration, but at least I can boot to kde again using knoppix 3.4 10-05-2004
DELL PowerEdge R730XD Server 2x E5-2690v4 2.6GHz =28 Cores 64GB H730 4xRJ45
$387.00
DELL R630 SERVER 8 x 2.5'' 2X E5-2680V4 32GB RAM IDRAC ENT & NDC 2X 495W PSU
$169.95
Dell PowerEdge R630 Server 2x E5-2640v3 2.60Ghz 16-Core 64GB H330
$182.65
Dell PowerEdge T420 2x Xeon E5-2430 V2 2.50GHZ 32GB DDR3-1600MHZ 2x 550W PSU
$149.95
Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 128GB RAM No HDD
$389.99
Dell Poweredge R210 Server X3450 2.67GHz 8GB RAM - NO HDDs
$59.99
Dell PowerEdge R620 Server - 256GB RAM, 2x8cCPU, 120Gb SSD/3x900Gb SAS, Proxmox
$320.00
Dell Poweredge R730xd 12 Bay LFF 2x SFF 2x E5-2680v3 2.5ghz H730p No Ram No HDD
$219.99
DELL PowerEdge R730 Server 2x E5-2697v4 2.3GHz =36 Cores 128GB H730 4xRJ45
$461.00
Dell PowerEdge R730 2x E5-2699V3 2.3Ghz 36 Core 128GB RAM H730 X520-I350 2x750W
$299.99