I think there is a bug in this version. When installed to HD, it seems that it tries to load modules for the 2.4.20 kernel, and it fails.
Then TV card doesn't work, you can't access ext3 partiones, etc...
The correct address is:
http://www.boegenielsen.dk:6969/
I think there is a bug in this version. When installed to HD, it seems that it tries to load modules for the 2.4.20 kernel, and it fails.
Then TV card doesn't work, you can't access ext3 partiones, etc...
Hi,
I have problem with this version 3.3. My graphic card chipset is SiS (SiS 630). Knoppix 3.3 from 2003.11.19 and 3.2, 3.1 worked very correctly. After installation on hdd, by trying "startx" I have communicates:
sisfb: Fatal error: Unable to reserve frame buffer memory
/lib/modules/2.4.24-xfs/kernel/drivers/video/sis/sisfb.o: init_module: No such device
/lib/modules/2.4.24-xfs/kernel/drivers/video/sis/sisfb.o insmod sis failed
Command "dmesg |grep error shows:
usbdevfs: remount parameter error
sisfb: Fatal error: Unable to reserve frame buffer memory
sisfb: Fatal error: Unable to reserve frame buffer memory
What can I do ??
Regards. Larry
I have the same problem on a Clevo 2200S with graphic card chipset SIS630 and only with this last Knoppix 3.3 version.
Klaudio
I just ordered a CD from CheapBytes. BTW, I'm now "dual booted" Knoppix (installed to a hard drive partition) and Gentoo. Gentoo has KDE 3.2 working. They're catching up with Debian rapidly in terms of packaging, although their "Live CD" isn't (as of 1.4) compressed, so they don't have 2 GB of software on it.Originally Posted by probono
Better use a newer KNOPPIX (new version 2004-02-16 with bug fixes) as it addresses issues with hard disk installations:
http://www.boegenielsen.dk:6969
I also have a laptop with Sis630 graphics chipset, it used to work no problem with knoppix, up to 3.3. since later version of 3.3 I get a blank screen if it starts xfree86. after looking at the current boot sequence and the previous boot sequence, it seems it used to detect my 630 graphics card and use the vesa server, now it detects my 630 and tries to use the sis server, which doesnt seem to work on this sis630. so I tried typing knoppix xmodule=vesa at the boot prompt and low and behold all works again. anyone got any ideas why the sis server gives a blank screen on a sis630 chipset? I dont care that much now I've solved it, I may lose some hardware acceleration, but at least I can boot to kde again using knoppix 3.4 10-05-2004
Fanxiang SSD 4TB 2TB 1TB PS5 SSD M.2 NVME SSD 7300MBS PCIe 4.0 Solid State Drive
$246.99
Fanxiang 4TB 2TB 1TB SSD 550MB/s 2.5'' SATA III Internal Solid State Drive lot
$188.99
4tb Ssd 870evo Internal Solid State Drive Hard Disk 2.5 Inch Sata SSD For Laptop
$50.15
Fanxiang SSD 4TB 2TB 1TB 512GB SATA SSD 2.5'' III Internal Solid State Drive lot
$108.29
Patriot P210 128GB 256GB 512GB 1TB 2TB 2.5" SATA 3 6GB/s Internal SSD PC/MAC Lot
$15.50
WD BLUE 3D NAND 250GB 2.5" SATA Laptop SSD Solid State Tested,Wiped -WDS250G2B0A
$16.00
Patriot P300 128G 256GB 512GB 1TB 2TB M.2 2280 PCIe Gen3x4 NVMe Internal SSD Lot
$16.99
SSD 512GB 1/2/4TB 870 EVO SATA III SSD 2.5'' Solid State Drive Upgrade PC Laptop
$39.99
Fanxiang M.2 SATA SSD 2TB 1TB 512GB 256GB SSD Internal M2 Solid State Drive Lot
$109.99
Fanxiang SSD 512GB 1TB 2TB 4TB 2.5'' SSD SATA III Internal Solid State Drive lot
$107.99