I think there is a bug in this version. When installed to HD, it seems that it tries to load modules for the 2.4.20 kernel, and it fails.
Then TV card doesn't work, you can't access ext3 partiones, etc...
The correct address is:
http://www.boegenielsen.dk:6969/
I think there is a bug in this version. When installed to HD, it seems that it tries to load modules for the 2.4.20 kernel, and it fails.
Then TV card doesn't work, you can't access ext3 partiones, etc...
Hi,
I have problem with this version 3.3. My graphic card chipset is SiS (SiS 630). Knoppix 3.3 from 2003.11.19 and 3.2, 3.1 worked very correctly. After installation on hdd, by trying "startx" I have communicates:
sisfb: Fatal error: Unable to reserve frame buffer memory
/lib/modules/2.4.24-xfs/kernel/drivers/video/sis/sisfb.o: init_module: No such device
/lib/modules/2.4.24-xfs/kernel/drivers/video/sis/sisfb.o insmod sis failed
Command "dmesg |grep error shows:
usbdevfs: remount parameter error
sisfb: Fatal error: Unable to reserve frame buffer memory
sisfb: Fatal error: Unable to reserve frame buffer memory
What can I do ??
Regards. Larry
I have the same problem on a Clevo 2200S with graphic card chipset SIS630 and only with this last Knoppix 3.3 version.
Klaudio
I just ordered a CD from CheapBytes. BTW, I'm now "dual booted" Knoppix (installed to a hard drive partition) and Gentoo. Gentoo has KDE 3.2 working. They're catching up with Debian rapidly in terms of packaging, although their "Live CD" isn't (as of 1.4) compressed, so they don't have 2 GB of software on it.Originally Posted by probono
Better use a newer KNOPPIX (new version 2004-02-16 with bug fixes) as it addresses issues with hard disk installations:
http://www.boegenielsen.dk:6969
I also have a laptop with Sis630 graphics chipset, it used to work no problem with knoppix, up to 3.3. since later version of 3.3 I get a blank screen if it starts xfree86. after looking at the current boot sequence and the previous boot sequence, it seems it used to detect my 630 graphics card and use the vesa server, now it detects my 630 and tries to use the sis server, which doesnt seem to work on this sis630. so I tried typing knoppix xmodule=vesa at the boot prompt and low and behold all works again. anyone got any ideas why the sis server gives a blank screen on a sis630 chipset? I dont care that much now I've solved it, I may lose some hardware acceleration, but at least I can boot to kde again using knoppix 3.4 10-05-2004
Crucial 8GB 1x8GB PC RAM PC3L 12800U DDR3 1600MHz Desktop Memory DIMM
$8.36
Crucial 8GB SO-DIMM PC3-12800 (DDR3-1600) Memory
$9.49
A-Tech 8GB DDR3 1600 PC3-12800 Laptop SODIMM 204-Pin Memory RAM PC3L DDR3L 1x 8G
$13.99
Micron 16GB DDR4-2400 SODIMM MTA16ATF2G64HZ-2G3E1 Laptop Memory RAM
$21.99
Crucial DDR3L 16GB 1600 2x 8GB PC3-12800 Laptop SODIMM Memory RAM PC3 16G DDR3
$22.45
Team T-FORCE VULCAN Z 32GB (2 x 16GB) PC RAM DDR4 3200 (PC4 25600) Memory
$54.99
A-Tech 8GB PC3-12800 Desktop DDR3 1600 MHz Non ECC 240-Pin DIMM Memory RAM 1x 8G
$13.99
HyperX FURY RAM DDR4 16GB 8GB 32GB 4GB 3200 2666 2400 2133 Desktop Memory DIMM
$9.64
Micron 32GB 2Rx4 PC4-3200 RDIMM DDR4-25600R ECC REG Registered Server Memory RAM
$64.99
USB Flash Drive Memory Stick Pendrive Thumb Drive 4GB, 8GB, 32GB, 64GB 128GB LOT
$223.42