I've switched my old 21" Sony monitor with a Samsung SyncMaster 173S flat panel. After the switch, the quality of the display is not as desirable, so I decided to change the monitor setting through the control center. I saved the changes and reboot the machine. My nightmare started.
Now once I boot the machine, I have the message "Video mode not supported" message. I tried booting from my knoppix CD and setting the display to the lowest resoluation and refresh rate, hopping that I can get back to a good start and trying reseting the Monitor, but nothing works.
I read in this forum that I can use the "knoppix" command. But I can't find the path to the command. Can somebody please help? thanks!
HP HPE962031 Blade server motherboard
$119.99
HP ProLiant BL460c G9 (Gen9) 2x E5-2670V3 12 Core 3.1GHz No Ram or No Drives
$59.98
Dell PowerEdge M620 0F9HJC Blade Server 2*E5-2670 2.60GHz 192GB RAM 2*300GB SAS
$103.99
Dell PowerEdge M640 Blade Server 2x Xeon Gold 5122 3.6GHz, No RAM, READ _
$401.04
Dell PowerEdge VRTX Rack Chassis 25-Bay 14.4TB HDD 2x M640 Blade 512GB RAM 2-Bay
$2335.00
DELL M630 BLADE SERVER x2 XEON E5-2660V3 @ 2.6GH H730 PERC HDD CADDIES 16GB FC
$50.00
HP ProLiant BL460c Server Blade (2 x CPU) 24GB RAM/No Drives
$45.60
Dell PowerEdge M1000E 16x Slots Blade Server W/ 8x Blade Server Blank Filler
$589.00
Dell PowerEdge M620 Blade Server
$39.99
Cisco UCS 5108 Blade Server Chassis Enclosure N20-C6508 4x PSU 8x Fans 2x Fabric
$139.99