Hello ---
I believe you can only do that on Coppermine Intel.
Does anyone know how i can retrieve the serialn number of my cpu and set it as my hostname for my knoppix cd?
Hello ---
I believe you can only do that on Coppermine Intel.
Or perhaps tie the box's identity to the NIC's MAC address. If there is more than one NIC, use any, all, or lowest/highest.
If use all:
If the group of MAC's is an already know group, then box ID matches the group.
If there is a new MAC(s) not otherwise known, just add it to the group.
If a MAC is missing, seek group on what is known.
If MACs from multiple groups are present as user to select group/ID
You can get the MAC address with:
You can set the hostname with:Code:ifconfig eth0 | grep Ethernet
Code:hostname whatevernameyouwant
HITACHI HUS724040ALA640 4TB 7200RPM 64MB SATA 6.0Gb/s 3.5" HARD DRIVE ZERO HOURS
$52.00
Seagate ST1000VM002 1TB 64MB SATA6Gb/s 3.5" (Low Power) Hard Drive -PC, CCTV DVR
$24.99
Seagate ST8000NM0055 8TB 7200RPM 256MB SATA 6.0 Gb/s 3.5" Enterprise Hard Drive
$34.47
Western Digital 4TB Internal 7.2KRPM 3.5" (WD4000FYYZ) SATA Hard Drive ZERO HOUR
$69.99
HGST Ultrastar DC HC520 12TB SATA 6Gb 256MB 3.5" Enterprise HDD- HUH721212ALE601
$74.99
CISCO A03-D1TBSATA 1TB 7.2K 6G 2.5INCH SATA HDD
$9.00
Seagate ST12000NM0127 12TB SATA 6Gb/s 256MB 7200RPM 3.5" Enterprise Hard Drive
$99.99
WD Ultrastar DC HC530 14TB SATA 6G 3.5" 7200RPM Enterprise HDD - WUH721414ALE604
$110.00
Western Digital Gold Enterprise 4TB,7200 RPM Internal Hard Disk Drive WD4002FYYZ
$39.95
Western Digital WD4000FYYZ RE 4TB 7200 RPM 64MB Cache SATA 6Gb/s 3.5" Hard Drive
$24.20