Does it say it can't find /etc/fstab or /etc/mtab or does it say that it can't find floppy in /etc/fstab or /etc/mtab? You may just be paraphrasing, but you can't just type mount floppy. It will be something more like mount /dev/fd0 /floppy.
I just Installed Knoppix 3.3 to a second HD on my win98 Machine.
Everything went well including the apt-get update.
I downloaded and Install two other programs with no problems. The double Boot works fine and no Log In Problems.
I have a ISDN Connection running a Ascend Router and networking two computers, This was all configured and working great. I have not found any programs that will not run.
I cannot mount the Floppy or the CDrom. If I open a Shell and enter mount floppy, I get an error that the ect/fstab or /ect/mtab cannot be found. The files do not exisist. Has anyone else had this problem or have a solution for it?
Thanks
SkyHawk
Does it say it can't find /etc/fstab or /etc/mtab or does it say that it can't find floppy in /etc/fstab or /etc/mtab? You may just be paraphrasing, but you can't just type mount floppy. It will be something more like mount /dev/fd0 /floppy.
This could be a error on my part.
I am entering Literal mount floppy or mount cd
Yes it tells me files not found.
This is my first adventure into linux so i'm winging it on very little knowledge. Thanks for the reply. Maybe you know the correct commands.
Skyhawk
Ok I rebooted in Knoppix and opened a Shell.
At the prompt I entered mount /dev/fd0/floppy
I get the same ERROR:
mount: can't find dev/fd0/floppy in /etc/fstab or /etc/mtab
My guess is some config file must be missing.
I tried the command in knopix user and in Super User both with the same error.
Thanks for the tip i'll keep on looking if I get any results i will make a post.
Thanks for any help
SkyHawk
Can you post your /etc/fstab please?
This is really weired now. I opened the fstab file and saved it to floppy and it worked.
Here it is,
# /etc/fstab: filesystem table.
#
# filesystem mountpoint type options dump pass
/dev/hdc1 / ext2 defaults,errors=remount-ro 0 1
/dev/hdc2 none swap sw 0 0
proc /proc proc defaults 0 0
/dev/fd0 /floppy vfat defaults,user,noauto,showexec,umask=022 0 0
/dev/cdrom /cdrom iso9660 defaults,ro,user,noexec,noauto 0 0
/dev/dvd /dvd iso9660 defaults,ro,user,noexec,noauto 0 0
/dev/cdaudio /cdaudio iso9660 defaults,ro,user,noexec,noauto 0 0
# Added by KNOPPIX
/dev/hda1 /mnt/hda1 vfat noauto,users,exec,umask=000 0 0
Is this any help
Thanks
Skyhawk
You need a space between "/dev/fd0" and "/floppy". You're basically telling it to mount the device at /dev/fd0 in the location of /floppy.Originally Posted by SkyHawk
The space did the trick on mounting the HD and the CD rom drive.
Thanks all for the Input. Us New linux users appreciate the help. hope I can add some input for others later on down the line.
SkyHawk
H261-Z61 2U 24SFF AMD Server 8x EPYC 7551 256-Cores 256GB RAM 8x25G NIC 2x2200W
$2812.18
Dell Poweredge R640 Server | 2x Xeon Gold 6132 | 128GB | H730P | 8x HDD Trays
$1849.00
HP ProLiant DL360 G9 Server | 2 x E5-2660V3 2.6Ghz | 64GB | 2 x 900GB SAS HDD
$339.00
CSE-118 Supermicro 1U 3x GPU Server 2.6Ghz 20-C 128GB CX353A 2x1600W PSU Rails
$454.03
Dell PowerEdge R620 Server 2x E5-2660 v1 2.2GHz 16 Cores 256GB RAM 2x 300GB HDD
$89.99
Dell R630 Server 2x E5-2620 V4 2.1GHz =16 Cores 128GB DDR4 1x 960GB 2x 1G 2x 10G
$210.00
Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 128GB RAM No HDD
$389.99
DELL PowerEdge R730 Server 2x E5-2680v4 2.4GHz =28 Cores 32GB H730 4xRJ45
$284.00
HP ProLiant ML350 Gen 9 Server 64GB RAM 2.4GHz Xeon 12-Core E5-2667 v3
$399.99
HP ProLiant DL380 Gen9 8SFF Server - E5-2698 v3 - 32Cores - 128GB Ram - 1TB HDD
$299.00