Hello!
/etc/network/interfaces
WRONG:
wireless-rate....
RIGHT:
wireless_rate...
and so on.
Bye!
Hello!
I've succesfully brought to life Dlink DWL 650+ card on my Knoppix 3.3 HD install using acx100 drivers from sourceforge (thanks to Craigs's acx100 HOWTO at http://www.houseofcraig.net/acx100_howto.php).
BUT...
Every time I reboot my notebook I have to redefine IP address, add route and initialize card manualy with iwconfig eth0 essid blabla... I've created and changed some files as stated in Craig's HOWTO but nothing helped:
/etc/sysconfig/network-scripts/ifcfg-eth0
/etc/network/interfaces
/etc/modutils/acx100_pci
As I am new to linux I have no idea how theese files are connected or what has to be changed to initiate my wlan card automaticaly on every reboot.
Thanks for your answers!
Hello!
/etc/network/interfaces
WRONG:
wireless-rate....
RIGHT:
wireless_rate...
and so on.
Bye!
How about an example of the proper format of the section in the file there are always post here on wireless and not really a working example to point someone too or if there is I have not seen it, perhaps you could even post a short summay of the steps you took in the Tips and Tricks section.Originally Posted by kpxpenguin
SUN Blade X6250 Server 8GB RAM DUAL PROCESSORS 594-4531-01
$109.99
CISCO 5108 Blade Server Chassis N20-C6508
$200.00
Dell PowerEdge FX2 FX2S Enclosure - 4x PowerEdge FC640 w/ 8x Gold 6132 112C 1TB
$2699.99
DELL POWEREDGE M620 SERVER BLADE INTEL XEON E5-2670 @ 2.60GHZ 128GB RAM 2X 146GB
$399.00
DELL M630 BLADE SERVER x2 XEON E5-2660V3 @ 2.6GH H730 PERC HDD CADDIES 16GB FC
$50.00
2 x HP ProLiant BL460c (447707-B21) Blade Servers No RAM No HDD
$30.00
Dell PowerEdge M620 0F9HJC Blade Server 2*E5-2670 2.60GHz 192GB RAM 2*300GB SAS
$103.99
Dell PowerEdge M640 Dual Bay 2.5" SFF Blade Server Barebone No Processors No RAM
$250.00
Cisco UCS 5108 Blade Server Chassis Enclosure 8x B200 M4 16x E5-2640v3 128gb
$599.99
Dell PowerEdge M620 Blade Server
$39.99