-
Persistent sound problem, esp. with integrated mobos. Ideas?
Knoppix: unbelievably good, esp. as a debian installer :)
My problem (and it's occurred on several varieties of Knoppix on a few different machines) is with sound. What happens is that the pleasant voice at bootup that says "beginning startup sequence" gets stuck; it starts skipping on the word "sequence," and until the sound server is killed, the system just keeps saying the 2nd syllable over and over, so it sounds like "wence-wence-wence-wence ..." etc.
Data points: Here are three machines on which I've enountered this problem:
- Shuttle SS40 system (Duron 1700) with built in just-about-everything (http://www.extremetech.com/article2/...,485198,00.asp) using a FS40 FlexATX DDR motherboard.
- Compaq iPaq (500MHz Intel PIII), another fully-integrated beast with an Intel 810e chipset.
[Note, for these two, and using the Knoppix CD I burned in September or October, I can overcome this by specifying "pci=bios" as a boot-time option, something I learned from a random someone's web page about Linux on the shuttle system. Without that option, little things like the integrated network card are ignored.]
- a generic 1GHz PIII laptop I encountered visiting my dad's house (his laptop); I did not know about and so did not try the pci=bios option on that.
And contrariwise, Knoppix sound works fine on another system of mine (including the Athlon system I'm tapping this one, using the integrated Apollo sound). That's the system I'm typing this from, in fact :)
*However* with the newer Knoppix I burned last month, I get the sound stuttering on the Shuttle system even if I specify pci=bios. Again, everything else seems to work great ..
So what is it about me, knoppix and sound? I've seen this happen on a few other systems as well. So, while Knoppix does a great job otherwise of hardware detection etc, on a majority of the systems I've so far tried I get this stuttering. I can see this being a big turn-off to someone who expected working sound on their system. Maybe I'm just a statistical anomoly, and it works better for everyone else -- I hope so.
I inquired about this a little while ago on the knoppix IRC channel and hit some helpful people but no one who knew what the secret was, if there is one. Any ideas? I'd rather have no sound than "wence-wence-wence ..."
Thanks,
Tim
-
I've got precisely the same problem with v3.3.......although i believe the polite voice for me is speaking german. I'm using a Biostar M7VIF MoBo which has Avance AC97 onboard sound. At least I am not the only one suffering this problem.......although I realise this is a very old thread. Has this issue been successfully resolved?
-
the same it's happening to me with my laptop (an airis).
i downloaded knoppix 3.3 and i only could listen the voice repeating the same sentence...
so, i tried with knoppix 3.2 and the same again!!
have you solutioned it??
i'll try today with 3.1 version....
un hola hola from spain
-
Senior Member
registered user
You might try this cheat code at boot: knoppix alsa
-
Junior Member
registered user
![Quote](images/misc/quote_icon.png)
Originally Posted by
L2Cache
You might try this cheat code at boot: knoppix alsa
sorry it didn't work. no error or anything. what now?
-
thanx, but i tried and... nah!! ![Sad](images/smilies/icon_sad.gif)
with 3.1 version the same... and with another distributions based on knoppix is happening the same...
any more ideas?
-
Looping intro sound!
Hi, I have the same problem, and I am so new to Knoppix and Linux that I don't know how to stop it, other than turning off my speakers.
Is there a way to kill the log-in sound and have the sound card function afterwards anyway? Something like the task manager in windows?
Something odd: The very first time I booted from the CD, I did NOT have this problem! But I've had it every single time afterwards.
I have version 3.3 on a SOYO P4X400 Dragon Lite mother-board, with 256 megs of memory, a 2.2 GHz Celeron, and an Nvidia GeForce 2 MX400 64 meg video card. I *LOVE* what I see of Knoppix so far, but I need to resolve this sound issue. Thanks for any help!
Gigi 188
Similar Threads
-
By saxguy in forum Hardware & Booting
Replies: 2
Last Post: 01-30-2005, 06:15 PM
-
By Phishman in forum Hardware & Booting
Replies: 1
Last Post: 01-23-2005, 04:31 AM
-
By Serow225 in forum Hdd Install / Debian / Apt
Replies: 1
Last Post: 10-27-2004, 04:36 AM
-
By pnti in forum General Support
Replies: 3
Last Post: 05-07-2003, 12:27 AM
-
By blubu in forum Hardware & Booting
Replies: 0
Last Post: 03-26-2003, 12:29 PM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
![NEW Sealed Cisco SFP-10G-LR 10GBASE-LR SFP+ 1310nm 10km *US Shipping* picture](/store/img/Tb4AAOSwmeVlqJuU/s-l225//NEW-Sealed-Cisco-SFP-10G-LR-10GBASE-LR-SFP-1310nm-.jpg)
NEW Sealed Cisco SFP-10G-LR 10GBASE-LR SFP+ 1310nm 10km *US Shipping*
$18.00
![New HP HPE Aruba J4858D 1G SFP LC SX 850nm 500m MMF XCVR Transceiver Module picture](/store/img/-RQAAOSwv-Rl1Cgp/s-l225//New-HP-HPE-Aruba-J4858D-1G-SFP-LC-SX-850nm-500m-MM.jpg)
New HP HPE Aruba J4858D 1G SFP LC SX 850nm 500m MMF XCVR Transceiver Module
$28.49
![New Cisco SFP-25G-SR-S 25G SFP28 25GBASE-SR 850nm 300m LC MMF Transceiver Module picture](/store/img/R5EAAOSwwLtmfi4p/s-l225//New-Cisco-SFP-25G-SR-S-25G-SFP28-25GBASE-SR-850nm-.jpg)
New Cisco SFP-25G-SR-S 25G SFP28 25GBASE-SR 850nm 300m LC MMF Transceiver Module
$51.30
![New Precision DWDM SFP+ 10G 80km Tunable Transceiver 50GHz C-Temp DWDM-SFP10G-C picture](/store/img/tqEAAOSwkbxmR-l8/s-l225//New-Precision-DWDM-SFP-10G-80km-Tunable-Transceive.jpg)
New Precision DWDM SFP+ 10G 80km Tunable Transceiver 50GHz C-Temp DWDM-SFP10G-C
$90.00
![GENUINE Cisco SFP-10G-SR V03 SFP+ GBIC Transceiver Module 10-2415-03 picture](/store/img/tAkAAOSwdENkHItI/s-l225//GENUINE-Cisco-SFP-10G-SR-V03-SFP-GBIC-Transceiver-.jpg)
GENUINE Cisco SFP-10G-SR V03 SFP+ GBIC Transceiver Module 10-2415-03
$6.80
![🔥🔥🔥 CISCO SFP-10G-SR V03 10-2415-03 850nm 10GBASE-SR SFP+ Multi Module 🔥🔥🔥 picture](/store/img/KTkAAOSwcmBisISE/s-l225//-CISCO-SFP-10G-SR-V03-10-2415-03-850nm-10GBASE-SR-.jpg)
🔥🔥🔥 CISCO SFP-10G-SR V03 10-2415-03 850nm 10GBASE-SR SFP+ Multi Module 🔥🔥🔥
$6.80
![Dell 10GBase SPF + Optical Transceiver Module - XYD50 picture](/store/img/gcYAAOSw18JlOCPJ/s-l225//Dell-10GBase-SPF-Optical-Transceiver-Module-XYD50.jpg)
Dell 10GBase SPF + Optical Transceiver Module - XYD50
$10.00
![NEW FS SFP-10G-T 10GBASE T SFP+ 30M Transceiver Module (Lot of 1 Unit) picture](/store/img/K7UAAOSwWdtmNYNP/s-l225//NEW-FS-SFP-10G-T-10GBASE-T-SFP-30M-Transceiver-Mod.jpg)
NEW FS SFP-10G-T 10GBASE T SFP+ 30M Transceiver Module (Lot of 1 Unit)
$39.95
![New Cisco GLC-TE 1G SFP Copper RJ45 100m 1000BASE-T Transceiver Module picture](/store/img/UFgAAOSwrw9l1Cbr/s-l225//New-Cisco-GLC-TE-1G-SFP-Copper-RJ45-100m-1000BASE-.jpg)
New Cisco GLC-TE 1G SFP Copper RJ45 100m 1000BASE-T Transceiver Module
$22.32
![New Sealed Cisco SFP-10G-LR 10GBASE-LR SFP Plug-in Transceiver Module picture](/store/img/~FsAAOSwqcFl7xTR/s-l225//New-Sealed-Cisco-SFP-10G-LR-10GBASE-LR-SFP-Plug-in.jpg)
New Sealed Cisco SFP-10G-LR 10GBASE-LR SFP Plug-in Transceiver Module
$15.00