-
Junior Member
registered user
changing kernel boot default in lilo.conf?
This is probably a simple fix, but I want to have linux 2.6.5 be the default booting kernel in lilo at startup. If I don't arrow down to linux 2.6.5 in my boot loader, it will default to 2.4. after 5 seconds.
Here's the part of my lilo.conf which I think changes the boot order:
__________________________________________________
...
...
# append=""
# Boot up Linux by default.
#
default="Linux"
image=/boot/vmlinuz
label="Linux"
initrd=/boot/initrd.img
append="ramdisk_size=100000 init=/etc/init lang=us apm=power-off nomce noscsi screen=1280x1024"
read-only
image=/boot/vmlinuz-2.4.26
label="Linux(2.4)-1"
initrd=/boot/initrd.img-2.4.26
append="ramdisk_size=100000 init=/etc/init lang=us apm=power-off nomce noscsi screen=1280x1024"
read-only
image=/boot/vmlinuz-2.6.5
label="Linux(2.6)-2"
initrd=/boot/initrd.img-2.6.5
append="ramdisk_size=100000 init=/etc/init lang=us apm=power-off nomce noscsi screen=1280x1024"
read-only
______________________________________________
I tried changing the line default="Linux"
to default="Linux(2.6)-2"
but that didn't help during boot. I would think that I need to change this line to the 'label' of the image I want, but it didn't work. Do I need to do additional changes in initrd?
Also, once I've succesfully changed the boot order, I'd like to change the timeout to 2 seconds.
Thanks for any help
-
Junior Member
registered user
Re: Guide to installing Knoppix 3.4ct with 2.6 kernel
Originally Posted by
Hayabusa
I sucessfully installed to HD the 3.4 ct version with the 2.6 kernel thanks largely to a thread in the "News" section and the wisdom and kindness of Stephen and champagnemojo who posted tips on how to get it to install.
Let me know if the following is covered somewhere else, but...
The 3.4 May 10th release does not recognize my Linksys WUSB V2.8 wireless device. Since it is hooked up to a desktop, and the system is upstairs, I'd like to avoid having to carry everything up and down to get Knoppix going.
I installed to the HD using the recommended option, and got a nice Debian system. However, the source for the kernel is mislinked (everything points to the 2.4 stuff even though booting into 2.6), and so I am unable to compile the Atmel drivers from Berlios to enable the network card.
Reading your step by step here, it would appear that if I DL'd a few tgz and deb files on a different machine and burn them to a CD that I might be able to get a kernel setup that would allow me to compile the Atmel drivers. Can I just DL the files that you are wget'ing in your article? Any particular place they need to be copied to? Anything else I need that you didn't since your connection was live?
Thanks,
Ewan Grantham
-
Junior Member
registered user
Anyone know if this is easier/better in the 5/17 release?
If not, would still love to get an answer to my "catch-22" situation.
Thanks,
Ewan
Similar Threads
-
By eraserman in forum General Support
Replies: 4
Last Post: 11-04-2004, 07:43 AM
-
By dmpop in forum The Lounge
Replies: 0
Last Post: 10-13-2004, 02:32 PM
-
By Sk83r99 in forum General Support
Replies: 3
Last Post: 08-17-2004, 12:38 AM
-
By naventus in forum Hdd Install / Debian / Apt
Replies: 22
Last Post: 07-17-2004, 05:05 AM
-
By Raj in forum Customising & Remastering
Replies: 1
Last Post: 02-19-2003, 01:19 PM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Dell Poweredge R640 Server | 2x Silver 4114 20 Cores | 192GB | 8x HDD Trays
$1939.99
Dell Poweredge R640 Server | 2x Silver 4114 20 Cores | 96GB | 8x 1.8TB Dell SAS
$2749.99
Dell Poweredge R640 Server | 2x Silver 4114 | 128GB | H730P | 4x HDD Trays
$1689.00
Dell Poweredge R640 Server | 2x Silver 4114 | 64GB | H730P | 2x HDD Trays
$1539.00
DELL PowerEdge R730 Server 2x E5-2690v3 2.6GHz =24 Cores 32GB H730 4xRJ45
$274.00
Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 128GB RAM No HDD
$389.99
Dell PowerEdge R620 Server 2x E5-2660 v1 2.2GHz 16 Cores 256GB RAM 2x 300GB HDD
$79.19
Dell PowerEdge R720XD Xeon E5-2680 V2 2.8GHz 20 Cores 256GB RAM 12x4TB
$510.00
1U Supermicro Server 10 Bay 2x Intel Xeon 3.3Ghz 8C 128GB RAM 480GB SSD 2x 10GBE
$297.00
DELL R730XD Server 2x E5-2680v4 2.4GHz =28 Cores 128GB H730 4x 1.2TB SAS 4xRJ45
$504.00