try something simpler:
cdrecord dev=0,0,0 Knoppix.iso
(but you need to give the full name of and -- depending on where you are -- path to the iso.)
The above lets cdrecord select the speed. Make sure you're using a 700Mb CD.
I downlaoded a Knoppix image and burn it in to a CDROM.
there was some problem with KDE(frequnet crashes) and it got freezed up.Then i tried to boot without any graphix.That works fine.
After some time I have got a error message like
CLOOP:read errroe at pos ********* in the file cdrom/KNOPPIX.
My md5checksum values are ok.
Then i booted with "knoppix testcd" it checks the md5sum and says that some files might have corrupted(I forget the exact output)
I went thro the FAQ in Knopiix.net and found that it may be because of the cd burner( CD-burner created a defective CD due to wrong writing speed or bad media).The command i gave is
cdrecord -v speed=2 dev=0,0,0 -data KNOPP*.iso.
Is there anything wrong in this.Any more options are needed or what?.if yes what it is?.
I read that one has to burn the cd as a "Single Session CD" or select finalize. The Mode should be set as "Disk at once" or "Track at once" .(Reference http://www.knoppix.net/docs/index.php/FaqDownloading).
Plz clarify my doubts
Thx in advance
try something simpler:
cdrecord dev=0,0,0 Knoppix.iso
(but you need to give the full name of and -- depending on where you are -- path to the iso.)
The above lets cdrecord select the speed. Make sure you're using a 700Mb CD.
Thanks .It is working now.I guess some problem with the CD
1U BareMetal pfsense opnsense Router Firewall DNS Server 6x 10GB Ethernet Ports
$149.00
1U Supermicro Server 10 Bay 2x Intel Xeon 3.3Ghz 8C 128GB RAM 240GB SSD 2x 10GBE
$259.00
2U 12 Bay SAS3 SuperMicro Server 6028U-TR4T+ W/ X10DRU-i+ Barebone 12 Caddy RAIL
$299.00
HP ProLiant MicroServer Gen8 Server Xeon E3-1220L 8GB RAM No HDD's
$229.99
HPE ProLiant MicroServer Gen10 16GB 4TB PID: 878488-S01
$425.00
HP HPE Microserver Gen 7 8 9 iLO 2/3/4/5Advanced License Lifetime Key| FAST SHIP
$10.00
HPE ProLiant MicroServer Gen10
$420.00
HPE ProLiant MicroServer Gen10 Plus v2 Ultra Micro Tower Server - 1 x Intel Xeon
$822.88
Supermicro CSE-847 Server 2*INTEL XEON E5-2690 V2 96GB 36-Bay 3.5" 4U SEE NOTES
$200.99
Supermicro 2U Server 12 Caddy Bay 3.5 LFF E ATX Storage Chassis SAS2 6GBPS Rail
$199.00