try something simpler:
cdrecord dev=0,0,0 Knoppix.iso
(but you need to give the full name of and -- depending on where you are -- path to the iso.)
The above lets cdrecord select the speed. Make sure you're using a 700Mb CD.
I downlaoded a Knoppix image and burn it in to a CDROM.
there was some problem with KDE(frequnet crashes) and it got freezed up.Then i tried to boot without any graphix.That works fine.
After some time I have got a error message like
CLOOP:read errroe at pos ********* in the file cdrom/KNOPPIX.
My md5checksum values are ok.
Then i booted with "knoppix testcd" it checks the md5sum and says that some files might have corrupted(I forget the exact output)
I went thro the FAQ in Knopiix.net and found that it may be because of the cd burner( CD-burner created a defective CD due to wrong writing speed or bad media).The command i gave is
cdrecord -v speed=2 dev=0,0,0 -data KNOPP*.iso.
Is there anything wrong in this.Any more options are needed or what?.if yes what it is?.
I read that one has to burn the cd as a "Single Session CD" or select finalize. The Mode should be set as "Disk at once" or "Track at once" .(Reference http://www.knoppix.net/docs/index.php/FaqDownloading).
Plz clarify my doubts
Thx in advance
try something simpler:
cdrecord dev=0,0,0 Knoppix.iso
(but you need to give the full name of and -- depending on where you are -- path to the iso.)
The above lets cdrecord select the speed. Make sure you're using a 700Mb CD.
Thanks .It is working now.I guess some problem with the CD
Cisco SFP-10G-T-S 10GBASE-T SFP+, 30m@Cat6a/Cat7, Copper, RJ45
$83.99
Cisco SFP-10/25G-CSR-S 10/25GBASE-CSR SFP28, 850nm, 100m, LC,
$54.00
Cisco SFP-10G-BX40D-I 10GBASE-BX-D BiDi SFP+, 1330nm-TX/1270nm-RX, 40km, LC, SMF
$59.99
Cisco GLC-TE 1000BASE-T SFP, 100m, Copper, RJ45
$27.99
Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver Module 10-2415-03
$8.00
SFP-10G-SR Original Cisco 10GBASE-SR SFP+ V02 Multi mode Transceiver 10-2415-02
$5.00
Brand New Cisco GLC-LH-SMD 1000BASE-LX/LH SFP Module 1310nm 10km SMF LC
$13.89
Lot of 10 - HP 10Gb SR SFP+ Transceiver 455883-B21 455885-001 456096-001 850nm
$23.99
LOT OF 20 Genuine Cisco SFP-10G-SR V03 10GBASE-SR SFP+ Transceiver Module
$89.00
Juniper Networks EX3300-48P 48-Port PoE+ 4x SFP+ Network Switch w/ Power Cord
$43.95