You might try LinNeighborhood, it is a port of network neighborhood. It will give you a gui for samba that lets you set up file and printer sharing. It might not be exactly what you want but it is a start. Just apt-get it
Hi @ all
I am a newbie on linux (3 Days) and I have a lot of problems, but I think everyone has problems in begining.
But I work harder to become better.
For 3 days now I am searching for a solution. Google is my best Friend, but I found nothing that could help me.
My problem is that I have no connections from linux to my windows PCīs.
All PCīs are connected over a Router ( 192.168.1.1)
Internet works fine.
Ping works also in both directions.
DHCP Broadcast: No
IP for eth0: 192.168.1.35
Mask: 255.255.255.0
Broadcast 192.168.1.255
Default-Gateway 192.168.1.1
Nameserver 192.168.1.1
I think that I have to change Samba.conf
I tried this tutorial but it doesnīt work. http://knoppix.net/docs/index.php/FaqSambaQuick
cd/etc/samba
bash: File not found
ok I tried it without cd
/etc/samba
bash: is a dirctory
cp smb.conf smb1.conf
cp: no stat: File not found
I wolud be nice to have Knoppix Linux as a fileserver, but how?
Knoppix runs from cd and I suppose that it must work as Fileserver also from cd or is it necessary that I have to install it on HD with knx-hdinstall skript?
I read on google that there is a webfrontent swat but I didnīt find it on Knoppix linux. Is there anybody who can help me with this problem?
(The answer can also be in German, or dutch.)
Thanks a lot to all
Best regards Piet
You might try LinNeighborhood, it is a port of network neighborhood. It will give you a gui for samba that lets you set up file and printer sharing. It might not be exactly what you want but it is a start. Just apt-get it
Hi there ...
Ok When you were installing Knoppix to your HD, after it copied the files to your HD, it started to Ask you questions so it could configurate your box correctly; some of these questions where as follows:
Start a Mail Server (smail) at boot? (y or N) (No)
Start sshd at boot? (y or N) (Yes)
Start Samba at boot? (y or n) (Yes)
Start KDE at boot? (y or n) (Yes)
Ok the thing is if you answered "NO" to the Samba question
samba is not starting at boot and no communication can ocurre. the other thing is Knoppix already bring a utility called XSMBrowser which in it's onw way is somelike MSN NetworkNeighborhood. I hope this helps....
Originally Posted by pietProblem 1: put a space after every command and every argument in UNIX. DOS doesn't care; UNIX does...Originally Posted by piet
Problem 2: You can't "execute" a directory.Originally Posted by piet
Problem 3: smb.conf is missing; if you couldn't cd to the directory, then that's why.Originally Posted by piet
There are a lot of good introductory books to Linux and UNIX; I would recommend a book called "Running Linux" from O'Reilly and Associates.
Just try smbmount this should work fine
DELL M630 BLADE SERVER x2 XEON E5-2660V3 @ 2.6GH H730 PERC HDD CADDIES 16GB FC
$50.00
Dell PowerEdge FX2s CTO Blade 4 Slot 2U Chassis 2x 2000W
$399.00
Cisco UCS 5108 Blade Server Chassis Enclosure N20-C6508 4x PSU 8x Fans 2x Fabric
$139.99
Dell PowerEdge M620 Blade Server
$39.99
Dell PowerEdge M630 Blade Server 1x Xeon E5-2630 v4 CPU / Motherboard P/N 0R10KG
$69.99
2 x HP ProLiant BL460c (447707-B21) Blade Servers No RAM No HDD
$30.00
Dell PowerEdge M620 0F9HJC Blade Server 2*E5-2670 2.60GHz 192GB RAM 2*300GB SAS
$103.99
Dell Poweredge FC630 Blade Server BAREBONES No CPU, No HDD, No RAM
$75.00
Dell PowerEdge M620 Blade Server 2x E5-2670 2.6Ghz 16-Cores 256gb 2x 146gb 15k
$244.99
UCSB-B200-M4 UCS Blade Server, 2x E5-2667 V3, 256GB RAM DDR4, 2x 300GB Drives
$299.99