-
installing usb device
hi im a complete noob
i use windows and have never used any kind of linux before.
ive put knoppix on a cd and booted from that. i would like to mount a usb device such as my n-gage or a mmc reader and the put some files on it.
can any1 please let me know how to do this please
bere in mind that ive never used linux before (i also have a german version of knoppix and i cnt read german)
(i can get into consol) lol
tia
james
-
Senior Member
registered user
Re: installing usb device
Originally Posted by
jam3z
bere in mind that ive never used linux before (i also have a german version of knoppix and i cnt read german)
(i can get into consol) lol
tia
james
I have no idea if this will work but you might try booting the Knoppix cd like so:
knoppix lang=us
It *might*get you an english verison.
After you boot open a terminal and enter:
cdrecord -scanbus
If Linux sees your USB devices is should be listed there. Then you need to mount them like so:
sudo mount /dev/sda1 /mnt/sda1
Keep in mind that if the mount point named 'mnt/sda1' doesn't exist the drive will fail to mount. Try mounting it to /mnt instead.
To see your USB drives you might prefer to use:
lsusb
-
well it sees the device
so i did
sudo mount dev/sda1 /mnt/sda1
and i got
mount: special device dev/sda1 does not exist
so i tryed
sudo mount mnt/sda1
and got
mount: /dev/sda1 already mounted or /mnt/sda1 busy
mount: according to mtab, /dev/sda1 is already mounted on /mnt/sda1
basicly i can see the usb device onthe desktop as sda1 and i can open it and see and copy the files from it. the only problem is that i cant put files on it (it just says it cant copy them here)
thnks for the help by the way
-
2 jam3z
Nothing's wrong with your usb-device (although I didn't quite get what it is - is it some sort of a flash-pen?)
You're simly not aware of the fact that writing to any partition is locked by default in Knoppix. This is the root of your problem.
In KDE: right-click on your sda1 device on the Desktop - choose "mount", right-click again: choose "change write access" or sth of the like - and click "yes" at prompt.
In console:
su
mount -t vfat -o rw /dev/sda1 /mnt/sda1
And don't forget to unmount your sda1-device prior to ejecting it manualy from the USB-port of your computer ("umount /mnt/sda1", or right-click on sda1 - "unmount" in KDE)
Similar Threads
-
By Jansi in forum Networking
Replies: 1
Last Post: 11-20-2004, 12:41 AM
-
By YuXeL in forum Hdd Install / Debian / Apt
Replies: 0
Last Post: 12-08-2003, 01:48 AM
-
By jza in forum Hdd Install / Debian / Apt
Replies: 1
Last Post: 05-03-2003, 11:30 PM
-
By kopachev in forum Hardware & Booting
Replies: 4
Last Post: 04-27-2003, 01:36 PM
-
By Sadara in forum General Support
Replies: 11
Last Post: 03-16-2003, 07:12 AM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Dell PowerEdge M610 Blade Server E5620@2.2GHZ (6x)8GB RAM (2x)146GB 15K SAS HDD
$75.00
Dell PowerEdge FX2 FX2S Enclosure - 4x PowerEdge FC640 w/ 8x Gold 6132 112C 1TB
$2294.99
Dell PowerEdge FX2 FX2S Enclosure - 4x PowerEdge FC640 w/ 8x Gold 6134 64C 1TB
$3299.99
DELL M630 BLADE SERVER x2 XEON E5-2660V3 @ 2.6GH H730 PERC HDD CADDIES 16GB FC
$50.00
DELL POWEREDGE M620 Blade 2x Xeon E5-2670 2.5GHz 128GB 2x300GB HDD
$94.50
Dell PowerEdge M1000e (BMX01) Server Enclosure w/ 16-PowerEdge M610 Blade Server
$899.99
Dell PowerEdge M620 Blade Server
$39.99
HP ProLiant BL460c G8(Gen8) 2x 8 CORE E5-2670 2.6GHz 192GB RAM 2x 146GB SAS HDD
$78.00
Dell PowerEdge FX2s CTO Blade 4 Slot 2U Chassis 2x 2000W
$349.00
UCSB-B200-M4 UCS Blade Server, 2x E5-2667 V3, 256GB RAM DDR4, 2x 300GB Drives
$299.99